TROUBLESHOOTING

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.

 

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

 

Engine will not start

1.

No spark.

1. Clean or replace spark plug. Reset spark plug

 

 

 

 

gap. Refer to Spark Plug Replacement earlier

 

 

 

 

in this manual.

 

 

2.

No fuel.

2. Push primer bulb until bulb is full of fuel. If bulb

 

 

 

 

does not fill, primary fuel delivery system is

 

 

 

 

blocked. Contact an authorized service dealer. If

 

 

 

 

primer bulb fills, engine may be flooded, proceed

 

 

 

 

to next item.

 

 

3.

Engine is flooded.

3. Set the CHOKE lever to the RUN position.

 

 

 

 

Squeeze the trigger and pull the rope repeatedly

until the engine starts and runs.

NOTE: Depending on the severity of the flooding, this may require numerous pulls of the rope.

Engine does not reach full speed and emits excessive smoke

1.Incorrect lubricant/fuel mixture.

2.Air filter screen is dirty.

3.Spark arrestor screen is dirty.

4.Spark plug fouled.

1.Use fresh fuel and the correct 2-cycle lubricant mix. (50:1).

2.Clean air filter screen. Refer to Cleaning Air Filter Screen earlier in this manual.

3.Contact an authorized servicing dealer.

4.Clean or replace spark plug. Reset spark plug gap. Refer to Spark Plug Replacement earlier in this manual.

Engine starts, runs, and ac-

1.

Idle speed screw on carburetor

1.

Turn idle speed screw clockwise to increase idle

celerates but will not idle

 

needs adjustment.

 

speed. See Figure 22.

 

 

 

 

 

 

 

Line will not advance

1.

Line is welded to itself.

1.

Lubricate line with silicone spray.

 

 

2.

Not enough line on spool.

2.

Install more line. Refer to the applicable line

 

 

 

 

 

replacement section in this manual.

 

 

3.

Line is worn too short.

3.

Pull lines while alternately pressing down on and

 

 

 

 

 

releasing spool retainer.

 

 

4.

Line is tangled on spool.

4.

Remove line from spool and rewind. Refer to

 

 

 

 

 

the applicable line replacement section in this

 

 

 

 

 

manual.

 

 

5.

Engine speed is too slow.

5. Advance line at full throttle.

 

 

 

 

 

 

 

Spool retainer hard to turn

1.

Screw threads are dirty or

1.

Clean threads and lubricate with grease - if no

 

 

 

damaged.

 

improvement, replace the spool retainer.

 

 

 

 

 

 

 

Grass wraps around drive

1.

Cutting tall grass at ground

1.

Cut tall grass from the top down to prevent

shaft housing and string

 

level.

 

wrapping.

head

2.

Operating trimmer at part

2.

Operate trimmer at full throttle.

throttle.

12 — English

Page 16
Image 16
Ryobi CS26 manuel dutilisation Troubleshooting, Gap. Refer to Spark Plug Replacement earlier, Speed. See Figure

CS26 specifications

The Ryobi CS26 is a versatile and powerful gas string trimmer designed for homeowners and landscape professionals alike. Featuring a 26cc, 2-cycle engine, the CS26 provides ample power to tackle tough grass and brush, ensuring that your yard work is completed with ease and efficiency. One of its standout features is the Easy Start technology, which significantly reduces the effort required to start the engine. This user-friendly feature allows both seasoned landscapers and newcomers to get the job done without the frustrating pull-start experience.

The CS26 incorporates a lightweight design, weighing in at just around 10 pounds, which enhances maneuverability and reduces operator fatigue during extended use. Its straight shaft design also provides better reach and the ability to navigate around hard-to-reach areas, such as under low-hanging branches or fences.

In terms of cutting capabilities, the Ryobi CS26 is equipped with a durable .095-inch diameter line. This heavy-duty line provides exceptional cutting performance and is designed to withstand the rigors of tough landscaping tasks. The trimmer also features an Easy Reload head, allowing users to quickly and efficiently replace the cutting line without the need for disassembly.

Additionally, the CS26 boasts an adjustable handle that provides comfort and better control while trimming. Users can customize the handle position to fit their preferred working stance, further enhancing the overall user experience. The anti-vibration technology integrated into the design helps to minimize hand fatigue, allowing for longer operation periods without discomfort.

The Ryobi CS26 is not only powerful but also eco-conscious. Its engine design offers lower emissions compared to older models, making it a suitable choice for users who are environmentally aware. The trimmer's capabilities make it ideal for various landscaping tasks, including edging, trimming, and clearing dense brush.

In summary, the Ryobi CS26 gas string trimmer combines power, ease of use, and comfort to create an efficient landscaping tool. With features such as Easy Start technology, a lightweight design, durable cutting line, and adjustable handles, it meets the demands of both homeowners seeking to maintain their lawns and professionals looking for reliable equipment to add to their toolkit. For anyone in search of a dependable string trimmer, the Ryobi CS26 represents an excellent choice that will deliver impressive results.