ASSEMBLY

TO ATTACH THE STRAIGHT SHAFT GRASS DEFLECTOR - SS26

See Figure 7.

Remove the wing screw from the grass deflector.

Insert the tab on the mounting bracket in the slot on the grass deflector.

Align the screw hole in the mounting bracket with the screw hole in the grass deflector.

Insert the wing screw through the mounting bracket and into the grass deflector.

Tighten the screw securely.

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

FILLING TANK

Clean surface around fuel cap to prevent contamination.

Loosen fuel cap slowly. Rest the cap on a clean surface.

Carefully pour fuel into the tank. Avoid spillage.

Prior to replacing the fuel cap, clean and inspect the gasket.

Immediately replace fuel cap and hand tighten. Wipe up any fuel spillage.

NOTE: It is normal for smoke to be emitted from a new engine after first use.

WARNING:

Never use blades, flailing devices, wire, or rope on this product. Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

WARNING:

Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke! Failure to heed this warning could result in seri- ous personal injury.

FUELING AND REFUELING THE TRIMMER

FUEL MIXTURE

This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded gasoline and 2-cycle engine lubricant in a clean 1 gallon container approved for gasoline.

Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use.

Mix a high quality 2-cycle engine lubricant at 2.6 oz. per gallon (US).

Do not use automotive lubricant or 2-cycle outboard ­lubricant. DO NOT mix quantities larger than usable in a 30 day period.

OXYGENATED FUELS

DO NOT USE E85 FUEL. IT WILL VOID YOUR WARRANTY.

NOTE:  Fuel system damage or performance problems re- sulting from the use of an oxygenated fuel containing more than the percentages of oxygenates stated below are not covered under warranty.

Ethanol. Gasoline containing up to 10% ethanol by volume (commonly referred to as E10) or 15% ethanol by volume (commonly referred to as E15) are acceptable. E85 is not.

STARTING AND STOPPING

See Figures 8 - 10.

Trimmer should be on a flat, bare surface for starting.

HIGH QUALITY 2-CYCLE ENGINE LUBRICANT

GASOLINE

LUBRICANT

 

 

1 gallon (US)

2.6 oz.

1 liter

20 cc (20 ml)

To start a cold engine:

Slowly press the primer bulb 10 times.

NOTE: After the 7th press, fuel should be visible in the primer bulb. If it is not, continue to press the primer until you see fuel in the bulb.

Set the choke lever to the FULL CHOKE position.

8 — English

Page 11 Page 13
Page 12
Image 12
Ryobi CS26 Operation, To Attach the Straight Shaft Grass Deflector SS26, Fueling and Refueling the Trimmer
Page 11 Page 13

CS26 specifications

The Ryobi CS26 is a versatile and powerful gas string trimmer designed for homeowners and landscape professionals alike. Featuring a 26cc, 2-cycle engine, the CS26 provides ample power to tackle tough grass and brush, ensuring that your yard work is completed with ease and efficiency. One of its standout features is the Easy Start technology, which significantly reduces the effort required to start the engine. This user-friendly feature allows both seasoned landscapers and newcomers to get the job done without the frustrating pull-start experience.

The CS26 incorporates a lightweight design, weighing in at just around 10 pounds, which enhances maneuverability and reduces operator fatigue during extended use. Its straight shaft design also provides better reach and the ability to navigate around hard-to-reach areas, such as under low-hanging branches or fences.

In terms of cutting capabilities, the Ryobi CS26 is equipped with a durable .095-inch diameter line. This heavy-duty line provides exceptional cutting performance and is designed to withstand the rigors of tough landscaping tasks. The trimmer also features an Easy Reload head, allowing users to quickly and efficiently replace the cutting line without the need for disassembly.

Additionally, the CS26 boasts an adjustable handle that provides comfort and better control while trimming. Users can customize the handle position to fit their preferred working stance, further enhancing the overall user experience. The anti-vibration technology integrated into the design helps to minimize hand fatigue, allowing for longer operation periods without discomfort.

The Ryobi CS26 is not only powerful but also eco-conscious. Its engine design offers lower emissions compared to older models, making it a suitable choice for users who are environmentally aware. The trimmer's capabilities make it ideal for various landscaping tasks, including edging, trimming, and clearing dense brush.

In summary, the Ryobi CS26 gas string trimmer combines power, ease of use, and comfort to create an efficient landscaping tool. With features such as Easy Start technology, a lightweight design, durable cutting line, and adjustable handles, it meets the demands of both homeowners seeking to maintain their lawns and professionals looking for reliable equipment to add to their toolkit. For anyone in search of a dependable string trimmer, the Ryobi CS26 represents an excellent choice that will deliver impressive results.
Top Page Image Contents