Ryobi D41 manual Removing Bits, Depress the switch trigger

OPERATION

REMOVING BITS

See Figure 3.

nUnplug the drill.

nRotate the chuck sleeve clockwise to open the chuck jaws.

NOTE: Rotate the chuck body in the direction of the ar-
row marked UNLOCK to loosen the chuck jaws. Do not	CHUCK
use a wrench to tighten or loosen the chuck jaws.
	JAWS
n Remove the drill bit.

LOCK-ON BUTTON

See Figure 5.

This drill is equipped with a lock-on feature, which is con- venient for continuous drilling for extended periods of time. To lock-on:

n Depress the switch trigger. DRILL BIT

nPush in and hold the lock-on button, located on the side of the handle.

nRelease the switch trigger.

nRelease the lock-on button and the drill will continue running.

nTo release the lock, depress and release the switch trig- ger.

If the lock-on feature is engaged during use and the drill becomes disconnected from the power supply, disengage the lock-on feature immediately.

CHUCK BODY

UNLOCK

(RELEASE)

LOCK

(TIGHTEN) CHUCK COLLAR

RIGHT

Fig. 3

WRONG

Fig. 4

LOCK-ON

BUTTON

Fig. 5

11