| SPECIFICATIONS |
Chuck Capacity | 5/64 in. (2 mm) - 1/2 in. (12.7 mm) |
Hammer Speed | Low |
No Load Speed | Low (0 - 1,000/min) & High (0 - 3,000/min) |
Input | 120 Volts, 60 Hz, AC only, 5.5 Amps |
Net Weight | 5.75 lbs. (2.6 kg) |
* BPM = Blows Per Minute |
|
|
|
| UNPACKING |
|
|
INSTRUCTIONS
Your hammer drill has been shipped completely assembled.
■Carefully remove the tool from the box. Make sure that all items listed in the packing list are included.
■Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
■Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
■If any parts are damaged or missing, please call
PACKING LIST
Hammer Drill
Carrying Case
Operator’s Manual
WARNING:
If any parts are missing do not operate your tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
APPLICATIONS
You may use your hammer drill for the purposes listed below:
■Hammer drilling in concrete, brick, or other masonry.
■Drilling in wood.
■Drilling in ceramics, plastics, fiberglass, and laminates.
■Drilling in both soft and hard metals.
■Using driving accessories, such as driving screws with screwdriver bits.
■Mixing paint.
6
