User’s Guide for the Polycom PowerCam Presenter
When the battery pack is charging, the battery LED on the top of the locator pack lights up red. After about three hours, the battery pack will be fully charged and the battery LED will change to green.
The battery pack lasts for about 8 hours. When it needs to be recharged, the operating LED on the top of the locator pack begins to blink red (normally, it blinks green when powered on).
Upgrading the Software
To upgrade the PowerCam Presenter software, you need the Softupdate application. You may be able to get this application on
Caution | Do not power off the system during the software upgrade process. If the |
| |
| upgrade is interrupted, the system may become unusable. |
|
|
To upgrade your software:
1.If you need to access the Softupdate application on the web:
a Using a web browser, go to www.polycom.com/videosoftware and log in to the Polycom Resource Center.
You will need to set up a PRC account, if you don’t already have one.
bNavigate to your product page.
Refer to the Polycom PowerCam Presenter Release Notes for information about the latest software version. Refer to the Upgrading Polycom Video Software document for detailed information about using the Softupdate program.
cDownload the PowerCam Presenter software update file in .zip format.
d
2.
Automatic Camera Tracking Specifications
To obtain optimum performance from the camera, please refer to the “Setting up the Camera” section of the Setting up the Polycom PowerCam Presenter document, which you received with your system. This document is also available at www.polycom.com/videodocumentation.
3 - 2
