User’s Guide for the Polycom PowerCam Presenter
To use a camera preset:
¾Press 
Preset 1 or 
Preset 2 on the remote control to move the camera to the position you stored for that preset.
If automatic camera tracking is on, it will turn off when you press 
Preset 1 or 
Preset 2.
Obtaining System Information
The System Information screen provides you with specific details about your
Polycom PowerCam Presenter.
To obtain system information:
1.Press 
Menu on the remote control.
2.Select the System button at the bottom of the screen. The System Information screen lists:
—System name
—Model
—Serial number
—IP address
—Software version
—MAC address
—Boot UI version
—Remote control battery weak indicator (if the battery is weak)
Tips on Using the Polycom PowerCam Presenter
Follow these tips to get the best results when using PowerCam Presenter:
•Do not use the locator pack when the batteries are weak. The System Information screen shows a remote control battery weak indicator if the batteries are weak. For information on how to recharge the batteries, refer to Charging the Locator Pack Batteries on page
2 - 16
