Ryobi DSG50 manual Features

FEATURES

WARNING:

Carefully read through this entire operator's manual before using your new screwdriver. Pay close attention to the Safety Rules, Warnings and Cautions. If you use your screwdriver properly and only for what it is intended, you will enjoy years of safe, reliable service.

KNOW YOUR DRYWALL SCREWDRIVER

See Figure 1.

Before attempting to operate your screwdriver, familiarize yourself with all operating features and safety requirements.

VARIABLE SPEED

This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is con- trolled by the amount of switch trigger depression.

BELT CLIP

A convenient feature provided on your screwdriver is a belt clip. It is molded on top of the motor housing of your screwdriver.

MAGNETIC BIT HOLDER

Your screwdriver has a magnetic bit holder. The magnet holds screwdriver bit and screws until ready to drive into drywall.

WARNING:	ADJUSTABLE NOSEPIECE
	Your screwdriver has an adjustable nosepiece for vary-
If any parts are missing, do not operate your
	ing screw depth. It can also be removed for easy bit
screwdriver until the missing parts are replaced.	changes.
Failure to do so could result in possible serious	ELECTRICAL CONNECTION
personal injury.
	Your screwdriver has a precision built electric motor. It
SWITCH	should be connected to a power supply that is 120
To turn your screwdriver ON, depress the switch trigger.	volts, 60 Hz, AC only (normal household current). Do
	not operate this tool on direct current (DC). A substantial
Release switch trigger to turn your screwdriver OFF.
	voltage drop will cause a loss of power and the motor will
FORWARD/REVERSE LEVER
	overheat. If your screwdriver does not operate when
Your screwdriver has a forward/reverse lever located	plugged into an outlet, double-check the power supply.
above switch trigger for changing direction of bit rotation.
	BELT CLIP
ADJUSTING SLEEVE
ADJUSTABLE
NOSEPIECE

1/4 in. (6.4 mm)	LOCK-ON
SCREWDRIVER
	BUTTON
BIT

MAGNETIC	FORWARD / REVERSE
BIT HOLDER	LEVER

SWITCH

TRIGGER

Fig. 1

7