| SPECIFICATIONS |
|
|
HAMMER DRILL |
|
Chuck | 1/2 in. |
Maximum Torque | 350 in.lbs |
Switch | Variable Speed |
Clutch | 24 positions |
Motor | 18 Volt DC |
Hammer Speed | Low (0 - 5,200 BPM*) & High (0 - 18,200 BPM*) |
No Load Speed | Low (0 - 400/min) & High (0 - 1400/min) |
CHARGER ASSEMBLY |
|
Charger Input | 120 Volts, 60 Hz, AC only |
Charger Voltage | 18 Volt |
Charge Rate | 1 Hour |
* Blows Per Minute |
|
|
|
| UNPACKING |
|
|
INSTRUCTIONS
Your hammer drill has been shipped completely assembled.
■Carefully remove the tool and accessories from the box.
■Make sure that all items listed in the packing list are included.
■Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
■Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
■If any parts are damaged or missing, please call
PACKING LIST
Hammer Drill with Auxiliary Handle Assembly
Battery Pack (2)
Charger
Carrying Case
Operator’s Manual
WARNING:
If any parts are missing do not operate your tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
The hammer drill should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury.
APPLICATIONS
You may use the hammer drill for the purposes listed below:
■Hammer drilling in concrete, brick, or other masonry.
■Drilling in wood.
■Drilling in ceramics, plastics, fiberglass, and laminates.
■Drilling in both soft and hard metals.
■Driving screws with screwdriver bits, using driving accessories.
■Mixing paint.
7
