White Rodgers 1050 installation instructions Installation Instructions, Description, Precautions

Models: 1050

1 10
Download 10 pages 50.04 Kb
Page 1
Image 1

TYPE 1050

INDOOR - OUTDOOR

WHITE-RODGERSHOT WATER TEMPERATURE CONTROL With Adjustable Reset Ratio

INSTALLATION INSTRUCTIONS

Operator: Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE PERSONAL INJURY AND/OR PROPERTY DAMAGE.

DESCRIPTION

The Type 1050 Indoor-Outdoor Control is designed for use on conventional hot water heating systems where it is desired to vary boiler temperature according to outdoor weather condi- tions. These controls are not recommended for radiant panel installations because of the lower boiler temperatures required. Type 1050 has open-on-rise (SPST) switch action.

This indoor-outdoor control increases or decreases frequency of burner operation to maintain a proper balance between boiler temperature and outdoor temperature. This control should always be used with a separate high limit control.

For increased flexibility, this control has two simple adjustments that enable it to be set to meet the needs of almost any installation. The square dial is used to adjust the reset ratio from 1-1/2 to 1, up to 1 to 1-1/2. The round dial permits additional adjustment, if necessary, to raise or lower boiler water tempera- ture at all outdoor temperatures.

PRECAUTIONS

THIS CONTROL MUST BE INSTALLED BY A QUALIFIED INSTALLER.

Do not exceed the specification ratings.

All wiring must conform to local and national electrical codes and ordinances.

This control is a precision instrument, and should be handled carefully. Rough handling or distorting compo- nents could cause the control to malfunction.

This control has been accurately calibrated at the factory. Any attempt to calibrate this control will void the White- Rodgers warranty.

CAUTION

To prevent electrical shock and/or equipment damage, disconnect electric power to system at main fuse or circuit breaker box until installation is complete.

WARNING

Do not use on circuits exceeding specified volt- ages. Higher voltages will damage control and could cause shock or fire hazard.

ELECTRICAL DATA

Switch Action: Open on Rise

Switch Rating: S.P.S.T.

14F.L.A., 84L.R.A., 120V.A.C. 7F.L.A., 42L.R.A., 240V.A.C. 5.6A.,@ 25V, 120V.A.C. 2.8A.,@ 240V.A.C.

SPECIFICATIONS

THERMAL DATA

Range: Outdoor Temp.- -20°to 70°F (-24°to 21°C)

Boiler Temp.- 60° to 120°F (16° to 49°C) min. setting -100°to 250°F (38° to 121°C) max. setting

Differential: - 10°F Fixed (5.5°C)

Capillary Length: Outside - 30 Ft. (9 m)

Inside - 15 Ft. (4.5 m)

Bulb Size: Outside - 3/8" x 3-5/8"

Inside - 7/16" x 3" for 1/2" NPT well

WHITE-RODGERS DIVISION

 

EMERSON ELECTRIC CO.

 

9797 REAVIS RD., ST. LOUIS, MO. 63123

 

(314) 577-1300, FAX (314) 577-1517

Printed in U.S.A.

PART NO. 37-1640B

Replaces 37-1640, 37-9163, 37-9264 9620

9999 HWY. 48, MARKHAM, ONT. L3P 3J3

(905) 475-4653, FAX (905) 475-4625

Page 1
Image 1
White Rodgers 1050 installation instructions Installation Instructions, Operator Save these instructions for future use

1050 specifications

The White Rodgers 1050 is a programmable thermostat designed to optimize energy savings while providing exceptional comfort for homeowners. With its user-friendly interface and advanced features, it has become a popular choice in modern HVAC systems.

One of the standout features of the White Rodgers 1050 is its programmable capability, allowing users to schedule temperature adjustments based on their daily routine. This feature helps maintain an ideal environment while reducing energy consumption. The unit typically offers four programmable periods per day, giving users the flexibility to customize settings for different times, whether it's day, evening, or overnight.

Additionally, the White Rodgers 1050 is equipped with a large, clear display that is easy to read, even from a distance. This backlit screen enhances visibility, particularly in low-light conditions, making adjustments a breeze. The intuitive layout of the buttons simplifies navigation through the various settings, enabling users to change temperatures or modes with minimal effort.

The thermostat utilizes advanced technology to enhance its performance. One of its key features is the adaptive recovery mode, which learns how long it takes to heat or cool a space to the desired temperature. This ensures that the home reaches the preferred temperature at the scheduled time without wasting energy. Moreover, the 1050 includes an automatic changeover feature, allowing it to switch seamlessly between heating and cooling modes based on the home’s needs, thus providing year-round comfort.

Another significant characteristic of the White Rodgers 1050 is its compatibility with a wide range of heating and cooling systems, including gas, electric, heat pump, and multi-stage systems. This versatility makes it a suitable option for various HVAC setups.

For those concerned about energy usage, the White Rodgers 1050 provides energy usage reports and alerts, helping homeowners monitor their energy consumption patterns. This feedback can motivate more energy-efficient practices, ultimately leading to lower utility bills.

In conclusion, the White Rodgers 1050 thermostat blends advanced technology, user-friendly features, and energy-saving capabilities into a single, efficient device. Its programmable options, adaptive recovery feature, and compatibility with various systems make it a valuable addition to any home looking to optimize comfort and efficiency. Whether you are upgrading an existing system or installing a new one, the White Rodgers 1050 is poised to deliver the performance and convenience modern homeowners expect.