MAINTENANCE

WARNING:

When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.

GENERAL

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, carbon dust, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. They contain chemicals that can damage, weaken, or destroy plastic.

BITS

Keep bits clean. Remove all accumulated build-up from bits after each use. Replace bits when they become dull.

REPLACING BULB

See Figure 9.

When purchasing a replacement bulb, request part number 7803001.

Follow these directions when replacing the bulb.

■Remove the end cap by turning it counterclockwise, and then by pulling it off.

■Turn bulb until notch aligns with tab.

■Remove old bulb.

■Insert new bulb, aligning notch with tab.

■Turn bulb a quarter turn.

■Replace end cap by aligning the bulb with the hole, pushing the cap down, and then by turning the cap clockwise.

Fig. 9

11