Scroll Cutting, See Figures 9, 10

SCROLL CUTTING

The scroll cutting feature is designed to permit 360° rotation of the saw blade so that intricate designs may be cut with minimum effort.

n Set the orbit adjustment to “0”.
n Loosen the base locking lever as shown in figure 9.
n Slide the base back to move the blade-support roller out of
the way of the saw blade as shown in figure 10.
n Retighten the base locking lever.
n Unlock the scrolling mechanism of your saw by sliding the
scrolling knob lock, located on the front of the jig saw, to	TO LOOSEN
the right.

nRotate the scrolling mechanism with your free hand as you apply pressure in the direction of the cut with your other hand as shown in figure 11.

SCROLLING

KNOB LOCK

TO TIGHTEN

Fig. 9

Fig. 10

Fig. 11

Image 14

Contents

Operators Manual Save this Manual for Future Reference Table of Contents Introduction Personal Safety General Safety RulesElectrical Safety Work Area Specific Safety Rules Additional Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATION Service Electrical Connection ElectricalDouble Insulation Extension Cords Features Product Specifications Know Your JIG SAW SwitchOrbital Adjustment Knob Variable Speed Control Selector Dust PICK-UP Feature AssemblyTo Install JIG SAW Blades Unpacking Operation Applications Do not Force the SAW Variable SpeedGeneral Cutting Orbital Motion Straight CUT See Figures 7 Scroll Cutting See Figures 9, 10, Angle Cutting Bevel Cutting See Figures 12 Metal Cutting Plunge CuttingTo Make a Plunge CUT See Figures 14, 15, See Figures 17 AdjustmentsBase Locking Lever Adjustment Lubrication MaintenanceGeneral Maintenance Page Service Model NO. and Serial no