OPERATION
FENCE HEIGHT
The adjustable fence on the biscuit joiner can be moved up or down to adjust the position of the blade in relation to the top of the workpiece. A scale on each side of the fence indicates the height of the fence from the center of the blade. The fence can be positioned up to two inches from the center of the blade. However, the scale and indicator point can only be set up to 2 in. from the center of the blade. Scale marks are in increments of 1/16 in.
SETTING THE FENCE HEIGHT
See Figure 7.
nUnplug the biscuit joiner.
nLoosen the locking knob approximately one turn.
nMove the fence up or down by rotating the height adjust- ment knob until the indicator point is aligned with the desired dimension on the scale.
nTighten the locking knob securely.
FENCE ANGLE
The adjustable fence on the biscuit joiner can be set at angles ranging from 0° to 135°, with accurate positive stops set in 45° increments. A scale is located on each side of the adjustable fence for identifying these positive stop angles.
INDICATOR HEIGHT SETTING
POINT SCALE
HEIGHT
ADJUSTMENT
KNOB
TO LOWER
T
O
TIGHTEN TO RAISE 
TO
LOOSEN
LOCKING
KNOB
Each stop reached when rotating the adjustable fence from one angle setting to another equals a 45° positive stop angle change.
ADJUSTABLE
FENCE ANGLE SETTING SCALE
Fig. 7
SETTING THE FENCE ANGLE
See Figure 8.
nUnplug the biscuit joiner.
nLoosen the locking knob approximately one turn.
nRotate the fence to the desired angle.
nTighten the locking knob securely.
ROTATE ADJUSTABLE FENCE
TO DESIRED ANGLE SETTING
TO
T
I
G
HTEN
TO LOOSEN
Fig. 8
13
