Ryobi JM82 manual Blade Screw Outer Washer Inner Blade

MAINTENANCE

nPlace a screwdriver in the hole provided in the bearing plate.

nPlace one of the non-cutting teeth located behind each carbide-tipped cutting tooth against the screwdriver or pin and lock the blade to prevent it from rotating. DO NOT lock the blade against one of the cutting teeth. Carbide tips will break.

nUsing a 3/16 in. hex key, remove the blade screw.

NOTE: Turn the blade screw counterclockwise to remove the blade.

nRemove the outer blade washer, blade and inner blade washer.

nClean wood particles and resin from the blade wash- ers, dust bag area, base assembly, and all surrounding parts.

nPlace the inner blade washer on the gear spindle.

nPlace the new blade onto the shoulder of the blade washer and secure with the outer blade washer and the blade screw.

NOTE: The blade screw fits into the cupped side of the outer blade washer.

NOTE: The blade teeth point toward the right of the tool when held in normal operating position. The direction of rotation is marked on the joiner blade. An arrow on the bottom of the front base assembly also indicates direction of rotation.

nPlace a screwdriver or pin in one of the two holes provided in the bearing plate and lock the blade to prevent it from rotating.

nTurn the blade screw clockwise and tighten securely with the hex key.

nReplace the shoe.

nReplace the washers and screws and tighten securely with a screwdriver.

nReplace the dust bag.

NON-CUTTING

SCREWDRIVERTOOTH BEHIND CARBIDE-TIPPED CUTTING TOOTH

HEX KEY

BLADE	BLADE
		Fig. 23
	SCREW

BLADE

SCREW

OUTER

BLADE

WASHER

BLADE

INNER BLADE

WASHER GEAR SPINDLE

Fig.24

21