| SPECIFICATIONS |
|
|
ORBITAL JIG SAW |
|
Length of Stroke | 1 in. |
Strokes Per Minute | 2,100 SPM |
Switch | Variable Speed |
Blade Clamp | |
Cutting Angle | 0º to 45º both Left and Right |
Orbital Motion | |
CHARGER ASSEMBLY |
|
Charger Input | 120 Volts, 60 Hz, AC only |
Charger Voltage | 18 Volt |
Charge Rate | 1 Hour |
|
|
| UNPACKING |
|
|
INSTRUCTIONS
Your Orbital Jig Saw has been shipped completely assembled.
Carefully remove the tool and accessories from the box.
Make sure that all items listed in the packing list are included.
Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
If any parts are damaged or missing, please call
PACKING LIST
Orbital Jig Saw
Battery Pack
Blades (2)
Charger
Carrying Case
Operator’s Manual
WARNING:
If any parts are missing do not operate your tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
The tool should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent acciden- tal starting that could cause serious injury.
APPLICATIONS
You may use the orbital jig saw for the purposes listed below:
Cutting wood surfaces.
Cutting thin sheet metal.
Cutting plastics and laminatess.
7
