Ryobi P202 manuel dutilisation Symbols, Name DESIGNATION/EXPLANATION, Symbol Signal Meaning

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL	SIGNAL	MEANING
	DANGER:	Indicates an imminently hazardous situation, which, if not avoided, will result
		in death or serious injury.
	WARNING:	Indicates a potentially hazardous situation, which, if not avoided, could result
		in death or serious injury.
	CAUTION:	Indicates a potentially hazardous situation, which, if not avoided, may result in
		minor or moderate injury.
	CAUTION:	(Without Safety Alert Symbol) Indicates a situation that may result in property
		damage.

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter- pretation of these symbols will allow you to operate the product better and safer.

SYMBOL	NAME	DESIGNATION/EXPLANATION
	Safety Alert	Indicates a potential personal injury hazard.
	Read Operator’s Manual	To reduce the risk of injury, user must read and understand opera-
		tor’s manual before using this product.
	Eye Protection	Always wear eye protection with side shields marked to comply
		with ANSI Z87.1.
	Wet Conditions Alert	Do not expose to rain or use in damp locations.
		This product uses nickel-­cadmium (Ni-Cd) and lithium-ion
		(Li-ion) batteries. Local, state, or federal laws may prohibit disposal
	Recycle Symbols	of batteries in ordinary trash. Consult your local waste authority
		for information ­regarding available recycling and/or disposal
		options.
V	Volts	Voltage
min	Minutes	Time
	Direct Current	Type or a characteristic of current
no	No Load Speed	Rotational speed, at no load
.../min	Per Minute	Revolutions, strokes, surface speed, orbits etc., per minute

WARNING:

Some dust created by power sanding, sawing, grinding, drilling, and other construction activities con- tains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.

5 – English