MAINTENANCE

WARNING:

When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear eye protection marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

WARNING:

To avoid serious personal injury, always remove the battery pack from the product when cleaning or performing any maintenance.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Only the parts shown on the parts list are intended to be repaired or replaced by the customer. All other parts should be replaced at an Authorized Service Center.

CHUCK REMOVAL

See Figures 11 - 13, page 12.

The chuck may be removed and replaced by a new one.

Lock the switch trigger by placing the direction of rotation selector in center position.

Insert a 5/16 in. or larger hex key into the chuck of the drill and tighten the chuck jaws securely.

Tap the hex key sharply with a mallet in a clockwise direction. This will loosen the screw in the chuck for easy removal.

Open the chuck jaws and remove the hex key. Using a screwdriver, remove the chuck screw by turning it in a clockwise direction.

Note:  The chuck screw has left hand threads.

Insert the hex key into the chuck and tighten the chuck jaws securely. Tap sharply with a mallet in a counterclock- wise direction. This will loosen the chuck on the spindle. It can now be unscrewed by hand.

TO RETIGHTEN A LOOSE CHUCK

The chuck may become loose on the spindle and develop a wobble. Also, the chuck screw may become loose, causing the chuck jaws to bind and prevent them from closing.

To tighten:

Lock the switch trigger by placing the direction of rotation selector in the center position.

Open the chuck jaws.

Insert the hex key into the chuck and tighten the chuck jaws securely. Tap the hex key sharply with a mallet in a clockwise direction. This will tighten the chuck on the spindle.

Open the chuck jaws and remove the hex key.

Tighten the chuck screw.

BATTERY PACK REMOVAL AND PREPARATION

FOR RECYCLING

WARNING:

Upon removal, cover the battery pack’s terminals with heavy-duty adhesive tape. Do not attempt to destroy or disassemble battery pack or remove any of its compo- nents. Lithium-ion and nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/ or serious injury.

NOTE: FIGURES (ILLUSTRATIONS) START ON PAGE 11 AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.

10 – English

Page 9 Page 11
Page 10
Image 10
Ryobi P204 manuel dutilisation General Maintenance, Chuck Removal, To Retighten a Loose Chuck
Page 9 Page 11

P204 specifications

The Ryobi P204 is a versatile and reliable tool that is designed to meet the demands of both DIY enthusiasts and professional tradespeople. As part of Ryobi's ONE+ system, this compact drill/driver features a powerful and efficient motor that delivers exceptional performance in a variety of applications.

One of the main features of the Ryobi P204 is its 18-volt lithium-ion battery compatibility, which offers extended run time and consistent power. This battery technology enables users to take advantage of a wide range of Ryobi's ONE+ tools, allowing for a seamless transition between tasks without the need for multiple battery types.

The P204 is equipped with an efficient 2-speed gear system, allowing users to select between a high-speed setting for drilling into softer materials and a lower speed setting for driving screws or working with harder materials. This versatility makes it suitable for both heavy-duty construction projects and lighter home improvement tasks.

Another important characteristic of the Ryobi P204 is its adjustable clutch with 24 torque settings. This feature provides precise control over the amount of force applied when driving screws, reducing the risk of damaging materials and ensuring a secure fit.

Additionally, the drill/driver includes a keyless chuck that allows for quick and easy bit changes. This user-friendly design minimizes downtime and enhances productivity, making it an essential tool for both casual users and professionals.

The P204 also features an integrated LED light, which illuminates the work area and allows for increased visibility in dimly lit spaces, ensuring accuracy and precision in every project.

For added convenience, the tool is lightweight and ergonomically designed, reducing fatigue during extended use and making it easy to maneuver in tight spaces.

Overall, the Ryobi P204 combines power, versatility, and comfort in a compact design, making it a favored choice for many users. Its efficient battery system, adjustable torque options, and user-friendly features equip it to tackle a wide range of tasks with ease and precision, cementing its reputation as a dependable addition to any tool collection.
Top Page Image Contents