ASSEMBLY

WARNING:

Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.

OPERATION

WARNING:

Do not allow familiarity with products to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear eye protection marked to comply with ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

TO INSTALL BATTERY PACK

See Figure 2, page 11.

Place the direction of rotation selector in the center

position­ .

Insert the battery pack into the product as shown.

Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the product before beginning operation.

WARNING:

Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.

TO REMOVE BATTERY PACK

Depress the latches on each side of the battery pack.

Remove the battery pack from the drill.

APPLICATIONS

You may use this product for the purposes listed below:

Drilling in all types of wood products (lumber, plywood, paneling, composition board, and hard board)

Drilling in ceramics, plastics, fiberglass, and laminates

Drilling in metals

This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium battery packs.

For complete charging instructions, refer to the Operator’s Manual for your Ryobi One+ battery pack and charger models.

BATTERY PROTECTION FEATURES

Ryobi lithium-ion batteries are designed with features that protect the lithium-ion cells and maximize battery life.

If the tool stops during use, release the trigger to reset and resume operation. If the tool still does not work, the battery needs to be recharged.

WARNING:

Battery products are always in operating condition. Therefore, the switch should always be locked when not in use or carrying at your side.

SWITCH TRIGGER

See Figure 3, page 11.

To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.

VARIABLE SPEED

The variable speed switch trigger delivers higher speed with increased trigger pressure and lower speed with decreased trigger pressure.

Note:  You might hear a whistling or ringing noise from the switch during use. Do not be concerned; this is a normal part of the switch function.

7 – English

Page 6 Page 8
Page 7
Image 7
Ryobi P204 manuel dutilisation Operation
Page 6 Page 8

P204 specifications

The Ryobi P204 is a versatile and reliable tool that is designed to meet the demands of both DIY enthusiasts and professional tradespeople. As part of Ryobi's ONE+ system, this compact drill/driver features a powerful and efficient motor that delivers exceptional performance in a variety of applications.

One of the main features of the Ryobi P204 is its 18-volt lithium-ion battery compatibility, which offers extended run time and consistent power. This battery technology enables users to take advantage of a wide range of Ryobi's ONE+ tools, allowing for a seamless transition between tasks without the need for multiple battery types.

The P204 is equipped with an efficient 2-speed gear system, allowing users to select between a high-speed setting for drilling into softer materials and a lower speed setting for driving screws or working with harder materials. This versatility makes it suitable for both heavy-duty construction projects and lighter home improvement tasks.

Another important characteristic of the Ryobi P204 is its adjustable clutch with 24 torque settings. This feature provides precise control over the amount of force applied when driving screws, reducing the risk of damaging materials and ensuring a secure fit.

Additionally, the drill/driver includes a keyless chuck that allows for quick and easy bit changes. This user-friendly design minimizes downtime and enhances productivity, making it an essential tool for both casual users and professionals.

The P204 also features an integrated LED light, which illuminates the work area and allows for increased visibility in dimly lit spaces, ensuring accuracy and precision in every project.

For added convenience, the tool is lightweight and ergonomically designed, reducing fatigue during extended use and making it easy to maneuver in tight spaces.

Overall, the Ryobi P204 combines power, versatility, and comfort in a compact design, making it a favored choice for many users. Its efficient battery system, adjustable torque options, and user-friendly features equip it to tackle a wide range of tasks with ease and precision, cementing its reputation as a dependable addition to any tool collection.
Top Page Image Contents