Ryobi P210 manual Tightening the Chuck, Batteries, Battery Pack Removal Preparation for Recycling

MAINTENANCE

TIGHTENING THE CHUCK

See Figures 14 and 15.

The chuck may become loose on the spindle and begin to shake when using the drill. Also, the chuck screw may become loose causing the chuck jaws to bind and prevent them from closing.

nLock the trigger switch by placing the rotation selector in center position.

nOpen the chuck jaws.

nInsert the hex key wrench into the chuck and tighten the chuck jaws securely.

nTap the hex key wrench sharply with a mallet in a clockwise direction. This will tighten chuck on the spindle.

nOpen the chuck jaws and remove the hex key wrench.

nTighten the chuck screw.

NOTE: The chuck screw has left-handed threads.

BATTERIES

The battery pack for this tool is equipped with nickel-cadmium rechargeable batteries. Length of service from each charging will depend on the type of work you are doing.

The batteries in this tool have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewelry, could result in a serious burn.

To obtain the longest possible battery life, we suggest the following:

nRemove the battery pack from the charger once it is fully charged and ready for use.

For battery storage longer than 30 days:

nStore the battery pack where the temperature is below 80°F.

nStore battery packs in a "discharged" condition.

BATTERY PACK REMOVAL AND

PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries

properly.

This product contains nickel-cadmium

batteries. Local, state or federal laws

may prohibit disposal of nickel-cadmium batteries in ordinary trash.

Consult your local waste authority for information regarding available recycling and/or disposal options.

WARNING:

Upon removal, cover the battery pack’s termi- nals with heavy-duty adhesive tape. Do not at- tempt to destroy or disassemble battery pack or remove any of its components. Nickel-cadmium batteries must be recycled or disposed of properly. Also, never touch both terminals with metal objects and/or body parts as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.

18