ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Cordless Reciprocating Saw
Saw Blades (2)
Lanyard (not included in combo)
Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
TO INSTALL SAW BLADE
See Figure 2.
nRemove battery pack.
nLift blade clamp lock / release lever located on side of saw.
nInsert saw blade between blade clamp and saw bar.
nLock blade clamp lever.
nReplace battery pack.
TO INSTALL /
TO RELEASE
BLADE CLAMP
LOCK / RELEASE LEVER
BLADE CLAMP
BLADE
TO LOCK
BLADE SHOWN |
|
CORRECT IN SAW BAR | Fig. 2 |
10