ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Orbital Jig Saw
Saw Blades (2)
Lanyard (not included in combo)
Operator’s Manual
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
TO INSTALL BLADES
See Figure 3.
nRemove battery pack. See Figure 6.
nLift blade clamp lock located on front of saw.
nInsert saw blade between blade clamp and saw bar.
nClose blade clamp lever.
nReplace battery pack.
BLADE STORAGE
SAW BLADE
Fig. 2
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
BLADE STORAGE
See Figure 2.
A convenient feature on your saw is the blade storage com- partment. The blade storage compartment is located on the back of the saw. It is convenient for storing extra blades and storing blades when not in use.
nTo open: Push the door down with your thumb or finger. Place blades in blade storage compartment.
nTo close: Push the door up with your thumb or finger.
BLADE CLAMP LOCK
BLADE CLAMP
SAW BLADE
Fig. 3
10
