Features, Product Specifications, ON/OFF Switch

FEATURES

No Load Speed	25,000 r/min (RPM)
Input	120 V, 60 Hz, AC only, 8.5 A

Lock lever

spindle lock

depth

adjustment knob

lED

worklightSquick release button

handle

Fig. 1

Image 8

Contents

OPERATOR’S Manual Save this Manual for Future Reference Table of Contents Introduction General Safety Rules Work Area SafetyElectrical Safety Personal Safety Specific Safety Rules Service Symbols Name DESIGNATION/EXPLANATION Service Symbol Signal Meaning Cord Length Wire Size A.W.G ElectricalDouble Insulation Electrical Connection Features Product SpecificationsON/OFF Switch Chip Shield Assembly REMOVING/INSTALLING Router Base AdjustmentsOperation Applications Installing/REMOVING bits To install the bitLED Worklight To remove the bit See Figures 5 SETting Depth of CUTSelectING Depth of CUT To make through table adjustments Turning the router on and off Operating the router Internal routingEdge routing Straight Edge Clamp Workpiece Freehand routing Edging with pilot bitWork Router Pilot TOP Edge Shaping Routerguide Work Pilot Whole Edge Shaping Direction of Feed and Thrust Proper Rate of FeedSee Figures 12 Proper Cutting Too fast Too slow Feeding Too FastFeeding Too slow Adjusting Lock lever Tension Depth of CUTSee Figures 16 To Tighten Maintenance AccessoriesGeneral Maintenance Cleaning the Collet Service Model NO. and Serial no