| FEATURES |
SPECIFICATIONS |
|
Depth of Cut | 0 - |
Collet | 1/4 in. (6 mm) |
Peak Horsepower | |
Ampere | 8.5 Amps |
Input | 120 Volts, 60 Hz, AC only |
No Load Speed | 25,000/min |
Power Cord | 10 ft. (3 m) |
Net Weight | 7 lbs. (3.2 kg.) |
Before using this tool, familiarize yourself with all operat- ing features and safety requirements. However, do not let familiarity with the tool make you careless.
This new router is equipped with the following features. See Figure 1.
MOTOR
The router kit has a powerful 8.5 amp motor with sufficient power to handle tough routing jobs. It delivers
SWITCH
The router has a conveniently located rocker switch.
ERGONOMIC DESIGN
The design of this tool provides for easy handling. It is designed for comfort and ease of grasp when operating in different positions and at different angles.
ELECTRICAL CONNECTION
Your router has a precision built electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A substantial voltage drop will cause a loss of power and overheating. If your tool does not operate when plugged into an outlet,
SPINDLE LOCK
The spindle lock secures the spindle so that you only need one wrench to loosen the collet nut and change cutters.
DEPTH ADJUSTING RING
The depth adjusting ring allows you to adjust the depth of cut.
DOUBLE INSULATION
Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual
LOCKING ARM
The locking arm secures the motor housing in the base.
CHIP SHIELD
A plastic chip shield on the base of the router provides protection against flying dust and chips.
8
