OPERATION
UNPACKING
Your saw has been shipped completely assembled and ready for use. Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Ryobi dealer to obtain replacement parts before attempting to operate saw.
An owner's operating manual and warranty registration are also included.
ELECTRICAL CONNECTION
Your saw has a precision built Ryobi electric motor. It should be connected to a power supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate this tool on direct current (DC). A voltage drop of more than 10 percent will cause a loss of power and the motor will overheat. If your tool does not operate when plugged into an outlet, double- check the power supply.
KNOW YOUR RECIPROCATING SAW
Before attempting to use your saw, familiarize yourself with all operating features and safety requirements. See Figure 1.
VARIABLE SPEED
CONTROL SELECTOR
BUTTON
ALLEN
WRENCH HOLDER
ALLEN WRENCH
TRIGGER
ALLEN WRENCH HOLDER
TO ROTATE BASE
ASSEMBLY DOWN
FLAT HEAD SCREW
(FOR FLUSH CUTTING)
BASE
ASSEMBLY
TO ROTATE BASE
ASSEMBLY UP
BLADE
BLADEBLADE
CLAMP CLAMP
SCREW
PIN
SET SCREW
(SECURES BASE ASSEMBLY) Fig. 1
A convenient feature on your saw is an allen wrench holder. It is located on the bottom portion of your saw's handle. It is
convenient for storing allen wrench when not in use. See Figure 1.
Page 5