OPERATION

METAL CUTTING

See Figure 7.

You may cut metals such as sheet steel, pipe, steel rods, aluminum, brass, and copper with the saw.

Observe the following tips when metal cutting:

n Be careful not to twist or bend the saw blade.

 

n Do not force the tool and use a slow speed setting.

 

n Use cutting oil when cutting soft metals and steel. Cutting

 

oil also keeps the blades cool, increases cutting action,

 

and prolongs blade life.

 

n Never use gasoline since normal sparking of motor could

 

ignite fumes.

 

n Clamp the workpiece firmly and cut close to the clamping

 

point to eliminate any vibration of the work. When cutting

 

conduit pipe or angle iron, clamp the workpiece in a vise

 

if possible and cut close to the vise. To cut thin sheet

Fig. 7

material, “sandwich” the material between hardboard or

 

plywood and clamp the layers to eliminate vibration and

 

material tearing.

 

nAlways keep firm pressure on the base to hold it securely against the workpiece.

MAINTENANCE

WARNING:

When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.

WARNING:

Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust. If operation is dusty, also wear a dust mask.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum- based products, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in serious personal injury.

Electric tools used on fiberglass material, wallboard, spackling compounds, or plaster are subject to accelerated wear and possible premature failure because the fiberglass chips and grindings are highly abrasive to bearings, brushes, commu- tators, etc. Consequently, we do not recommended using this tool for extended work on these types of materials. However, if you do work with any of these materials, it is extremely important to clean the tool using compressed air.

LUBRICATION

All of the bearings in this tool are lubricated with a sufficient amount of high grade lubricant for the life of the unit under normal operating conditions. Therefore, no further lubrica- tion is required.

12

Page 12
Image 12
Ryobi RJ162VK manual Metal Cutting, General Maintenance, Lubrication

RJ162VK specifications

The Ryobi RJ162VK is an innovative jigsaw designed to meet the needs of both DIY enthusiasts and professional woodworkers. This tool is packed with features that enhance accuracy, comfort, and efficiency, making it a versatile addition to any workshop.

One of the standout features of the RJ162VK is its powerful 6.5-amp motor, which provides excellent cutting performance in various materials, including wood, metal, and plastic. The jigsaw delivers a variable speed control ranging from 800 to 3,000 strokes per minute, allowing users to adjust the speed according to the specific cutting task. This level of control is particularly beneficial when working on delicate projects that require precision.

The RJ162VK is equipped with a 4-position orbital action system that allows users to customize the cutting action, thereby optimizing the tool for different applications. The orbital settings can be adjusted depending on whether you need a smooth finish or faster, more aggressive cuts. This feature is particularly advantageous for those working with hardwoods or materials that require rapid cutting.

Comfort is also a priority with the Ryobi RJ162VK. The tool features an ergonomic design that reduces fatigue during prolonged use. Its rubber overmold grip ensures a secure hold, providing better stability and control when executing intricate cuts. Furthermore, the built-in blower keeps the cutting line clear of debris, enhancing visibility and precision during operation.

Another noteworthy characteristic of the RJ162VK is its tool-less blade change system. This allows users to quickly and safely swap blades without needing additional tools, saving valuable time during project transitions. The jigsaw is compatible with both T-shank and U-shank blades, offering users a wide range of blade options for various cutting tasks.

Additionally, the Ryobi RJ162VK comes with a built-in laser guide, which aids users in achieving straight, accurate cuts. This laser alignment feature is especially useful for making precise cuts on larger workpieces, ensuring that projects meet high-quality standards.

Overall, the Ryobi RJ162VK combines power, precision, and user-friendly features, making it an ideal choice for those looking to enhance their woodworking capabilities. With its blend of advanced technology and practical design, this jigsaw is sure to become an essential tool for professionals and hobbyists alike.