GENERAL SAFETY RULES

WARNING:

Read and understand all instructions. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS

WORK AREA

n Keep your work area clean and well lit. Cluttered

benches and dark areas invite accidents.

nDo not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

nKeep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

nDouble insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three- wire grounded power cord and grounded power supply system.

nAvoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

nDon’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of elec- tric shock.

nDo not abuse the cord. Never use the cord to carry the tools or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

nWhen operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

PERSONAL SAFETY

nStay alert, watch what you are doing and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

nDress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

n Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the switch or plugging in tools that have the switch on invites accidents.

nRemove adjusting keys or wrenches before turning the tool on. A wrench or a key that is left attached to a rotating part of the tool may result in personal injury.

nDo not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

nUse safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

nDo not wear loose clothing or jewelry. Contain long hair. Loose clothes, jewelry, or long hair can be drawn into air vents.

nDo not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations.

TOOL USE AND CARE

nUse clamps or other practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control.

nDo not force tool. Use the correct tool for your appli- cation. The correct tool will do the job better and safer at the rate for which it is designed.

nDo not use tool if switch does not turn it on or off. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

nDisconnect the plug from power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

nStore idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

nMaintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with sharp cutting edges are less likely to bind and are easier to control.

nCheck for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

nUse only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

nKeep the tool and its handle dry, clean and free from oil and grease. Always use a clean cloth when clean- ing. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.

3

Page 2 Page 4
Page 3
Image 3
Ryobi RJ162VK manual General Safety Rules, Work Area, Electrical Safety, Personal Safety, Tool USE and Care
Page 2 Page 4

RJ162VK specifications

The Ryobi RJ162VK is an innovative jigsaw designed to meet the needs of both DIY enthusiasts and professional woodworkers. This tool is packed with features that enhance accuracy, comfort, and efficiency, making it a versatile addition to any workshop.

One of the standout features of the RJ162VK is its powerful 6.5-amp motor, which provides excellent cutting performance in various materials, including wood, metal, and plastic. The jigsaw delivers a variable speed control ranging from 800 to 3,000 strokes per minute, allowing users to adjust the speed according to the specific cutting task. This level of control is particularly beneficial when working on delicate projects that require precision.

The RJ162VK is equipped with a 4-position orbital action system that allows users to customize the cutting action, thereby optimizing the tool for different applications. The orbital settings can be adjusted depending on whether you need a smooth finish or faster, more aggressive cuts. This feature is particularly advantageous for those working with hardwoods or materials that require rapid cutting.

Comfort is also a priority with the Ryobi RJ162VK. The tool features an ergonomic design that reduces fatigue during prolonged use. Its rubber overmold grip ensures a secure hold, providing better stability and control when executing intricate cuts. Furthermore, the built-in blower keeps the cutting line clear of debris, enhancing visibility and precision during operation.

Another noteworthy characteristic of the RJ162VK is its tool-less blade change system. This allows users to quickly and safely swap blades without needing additional tools, saving valuable time during project transitions. The jigsaw is compatible with both T-shank and U-shank blades, offering users a wide range of blade options for various cutting tasks.

Additionally, the Ryobi RJ162VK comes with a built-in laser guide, which aids users in achieving straight, accurate cuts. This laser alignment feature is especially useful for making precise cuts on larger workpieces, ensuring that projects meet high-quality standards.

Overall, the Ryobi RJ162VK combines power, precision, and user-friendly features, making it an ideal choice for those looking to enhance their woodworking capabilities. With its blend of advanced technology and practical design, this jigsaw is sure to become an essential tool for professionals and hobbyists alike.
Top Page Image Contents