OPERATION

Before shutting off the engine:

nPlace the injection hose in a bucket of clean water.

nFlush for 1 - 2 minutes (spray clear water through the spray wand).

nShut off the engine.

NOTE: Shutting OFF ( O ) the engine will not relieve pressure in the system. Point nozzle in a safe direction and pull trigger to release water pressure.

RINSING WITH THE PRESSURE WASHER

nTurn off the pressure washer and shut off the water supply. Point nozzle in a safe direction and pull trigger to release water pressure.

nEngage the lock out on the trigger handle by pushing up on the lock out until it clicks into the slot.

nRemove the nozzle by placing hand over nozzle then pulling back the quick-connect collar. Place nozzle in the nozzle storage area on the top of the machine.

nSelect the right nozzle for the job:

•Use medium pressure nozzle (green) for items such as a car or boat.

•Use higher pressure nozzle for jobs such as stripping paint and degreasing the driveway. When using these nozzles, test a small area first to avoid surface damage.

nStart at the top of the area to be rinsed and work down, overlapping the strokes.

USING THE CLEANING DECK

See Figures 24 - 25.

NOTE: Do not use the surface cleaner on a non-horizontal surface.

WARNING:

To reduce the risk of injection or injury, only use the cleaning deck on flat, horizontal surfaces. Never lift the cleaning deck from the cleaning surface while operating the pressure washer.

nInstall the cleaning deck and connect the garden hoses as described in the assembly section of this manual.

nStart the pressure washer as described earlier in this manual.

nWalk slowly behind the cleaning deck, cleaning as you go.

NOTE: If striping or swirling occurs, slow your pace. If problem continues, see Troubleshooting later in this manual.

Fig. 24

Fig. 25

CAUTION:

Striking any raised obstacle while using with the clean- ing deck will damage the unit. If contact does ­occur and causes vibration when operating the pressure washer, stop and replace the spray bar. Continuing to operate the unit without replacing the spray bar could result in serious injury or damage to the unit.

NOTE: See figure 29 on page 20 for the location of the spray bar.

18

Page 17 Page 19
Page 18
Image 18
Ryobi RPW2500WB Rinsing with the Pressure Washer, Using the Cleaning Deck, Before shutting off the engine, See Figures 24
Page 17 Page 19

RPW2500WB specifications

The Ryobi RPW2500WB is a powerful and versatile pressure washer designed for both residential and light commercial use. With a robust 2,500 PSI and a 2.3 GPM flow rate, this machine effectively tackles tough cleaning tasks such as removing grime from driveways, patios, decks, and vehicles. Its impressive cleaning power allows users to quickly and efficiently complete large cleaning jobs, making it a valuable tool for homeowners and service providers alike.

One of the standout features of the RPW2500WB is its powerful 1.7 HP motor, which enables high-pressure water output, ensuring a thorough clean with minimal effort. The electric start is a convenient addition, allowing for easy ignition without the hassle of pull cords, enhancing the user experience significantly. The machine is also equipped with a durable, corrosion-resistant metal frame that provides stability and longevity, ensuring that it can withstand the rigors of frequent use.

In terms of technology, the RPW2500WB features an adjustable spray nozzle that allows users to customize the water pressure and spray pattern to suit various cleaning tasks. This versatility is particularly beneficial for tackling different surfaces, from sensitive vehicle finishes to tough concrete surfaces. The inclusion of quick-connect nozzles also enhances usability, enabling users to switch between tasks without delay.

The RPW2500WB incorporates environmentally friendly features, such as a detergent tank that allows for the application of cleaning solutions, ensuring that even the most stubborn stains can be eliminated effectively. The onboard storage for accessories and hoses makes it easy to keep the workspace organized and tidy.

Another notable characteristic is its lightweight design, which includes durable wheels for easy mobility. This portability ensures that users can transport the pressure washer effortlessly to different job sites or store it compactly when not in use.

In conclusion, the Ryobi RPW2500WB pressure washer combines power, versatility, and user-friendly features, making it an excellent choice for anyone seeking an efficient cleaning solution. With its advanced technologies and practical design elements, the RPW2500WB stands out in the crowded market of pressure washers, offering reliability and performance that users can depend on.
Top Page Image Contents