RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
■KNOW YOUR POWER TOOL. Read operator's manual carefully. Learn its applications and limitations as well as the specific potential hazards related to this tool.
■GUARD AGAINST ELECTRICAL SHOCK by preventing body contact with grounded surfaces. For example: Pipes, radiators, ranges, refrigerator enclosures.
■KEEP GUARDS IN PLACE and in working order.
■KEEP WORK AREA CLEAN. Cluttered areas and benches invite accidents.
■AVOID DANGEROUS ENVIRONMENT. Don't use power tool in damp or wet locations or expose to rain. Keep work area well lit.
■KEEP CHILDREN AND VISITORS AWAY. All visitors should wear safety glasses and be kept a safe distance from work area. Do not let visitors contact tool or extension cord.
■STORE IDLE TOOLS. When not in use tools should be stored in a dry and high or
■DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed.
■USE RIGHT TOOL. Don't force small tool or attachment to do the job of a heavy duty tool. Don't use tool for purpose not intended - for example - A circular saw should never be used for cutting tree limbs or logs.
■WEAR PROPER APPAREL. Do not wear loose clothing or jewelry that can get caught in the tool's moving parts and cause personal injury. Rubber gloves and nonskid footwear are recommended when working outdoors. Wear protective hair covering to contain long hair and keep it from being drawn into nearby air vents.
■ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses have only
■PROTECT YOUR LUNGS. Wear a face or dust mask if operation is dusty.
■PROTECT YOUR HEARING. Wear hearing protection during extended periods of operation.
■DON'T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil and sharp edges.
■SECURE WORK. Use clamps or a vise to hold work. It's safer than using your hand and it frees both hands to operate the tool.
■DON'T OVERREACH. Keep proper footing and balance at all times. Do not use while standing on a ladder or unstable support.
■MAINTAIN TOOLS WITH CARE. Keep tools sharp at all times, and clean for best and safest performance. Follow instructions for lubricating and changing accessories.
■DISCONNECT TOOLS. When not in use, before servicing, or when changing or adjusting attachments, blades, bits, cutters, sandpaper, etc., all tools should be disconnected from power supply.
■REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on.
■AVOID ACCIDENTAL STARTING. Don't carry
■MAKE SURE YOUR EXTENSION CORD IS IN GOOD CONDITION. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. A wire gage size (A.W.G.) of at least 16 is recommended for an extension cord 100 feet or less in length. A cord exceeding 100 feet is not recommended. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.
■OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords suitable for use outdoors. Outdoor approved cords are marked with the suffix
■NEVER USE THIS OR ANY POWER SANDER FOR WET SANDING OR LIQUID POLISHING. Failure to comply can result in electrical shock causing serious injury or worse.
■KEEP HANDS AWAY FROM SANDING AREA.
■NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal sparking of the motor could ignite fumes.
Page 3
