Ryobi RT100 warranty Unpacking

UNPACKING

Before assembling your router table check to see that all parts listed are included. See Figure 2. Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, call 1-800- 525-2579 for your nearest RYOBI AUTHORIZED SERVICE CENTER to obtain replacement parts before attempting to assemble or use your router table.

WARNING:

If any parts are damaged or missing, do not use your router table until the parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

To prevent accidental starting or electrical shock that could cause possible serious personal injury, assemble all parts to your router table before connecting it to power supply. Neither the router nor the table should be connected to power supply when you are assembling parts, making adjustments, installing or removing cutters, cleaning, or when not in use.

5

18

1

9

13

		11
16	10	7
6	4	8
		2
19		17
20
	3	14
	15

1.Table leg (4)

2.1/4-20 x 1/2 in. socket head cap screw (22)

3.3/16 in. hex key (1)

4.Lock washer (16)

5.Switch box assembly (1)

6.Lower guard (2)

7.5/16-18 x 1 in. phillips head machine screw (3)

8.#6 thread cutting screw (2)

12

9.Fence assembly (1)

10.1/4-20 square nut (2)

11.Fence lock knob (2)

12.Guard post (1)

13.Guard/dust cover assembly (1)

14.Miter gauge bar (1)

15.Miter gauge (1)

16.Throat plate (5)

17.Miter gauge knob (1)

Fig. 2

18.Router table surface (1)

19.#6-32 x 5/8 in. pan head phillips machine screw (1)

20.Miter gauge pointer (1)

21.Operator’s manual (not shown) (1)

22.Warranty registration card (not shown) (1)

Page 7