OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this product for the purposes listed below:

Clear leaves and other debris from your lawn

Keeping decks and driveways free from grass clippings, leaves, pine needles, and other debris

FUELING AND REFUELING the blower

WARNING:

Gasoline and its vapors are highly flammable and ex- plosive. To prevent serious personal injury and property damage, handle it with care. Keep away from ignition sources and open flames, handle outdoors only, do not smoke while mixing gasoline and lubricant together; and wipe up spills immediately.

FUEL MIXTURE

This product is powered by a 2-cycle engine and requires pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded gasoline and 2-cycle engine lubricant in a clean 1 gallon container approved for gasoline.

Recommended fuel: This engine is certified to operate on unleaded gasoline intended for automotive use.

Mix a high quality 2-cycle engine lubricant at 2.6 oz. per gallon (US).

Do not use automotive lubricant or 2-cycle outboard

lubricant­ .

DO NOT mix quantities larger than usable in a 30 day period.

high quality 2-cycle engine lubricant

Gasoline

lubricant

 

 

1 gallon (US)

2.6 oz.

1 liter

20 cc (20 ml)

FILLING TANK

Clean surface around fuel cap to prevent contam- ination.

Loosen the fuel cap slowly by turning counterclockwise. Rest the cap on a clean surface.

Carefully pour fuel into the tank. Avoid spillage.

Prior to replacing the fuel cap, clean and inspect the gasket.

Immediately replace fuel cap and hand tighten by turning it clockwise. Wipe up any fuel spillage.

Move at least 30 ft. away from refueling area before starting the product.

WARNING:

Check for fuel leaks, which are a fire hazard. Failure to do so could result in a fire that could cause serious personal injury.

NOTE: It is normal for smoke to be emitted from a new engine after first use.

WARNING:

Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke and stay away from open flames and sparks. Failure to safely handle fuel could result in serious per- sonal injury.

OXYGENATED FUELS

DO NOT USE E85 FUEL. IT WILL VOID YOUR WAR- RANTY.

NOTE: Fuel system damage or performance problems re- sulting from the use of an oxygenated fuel containing more than the percentages of oxygenates stated below are not covered under warranty.

Ethanol. Gasoline containing up to 10% ethanol by volume (commonly referred to as E10) or 15% ethanol by volume (commonly referred to as E15) are acceptable. E85 is not.

8 — English

Page 10
Image 10
Ryobi RY09605 manuel dutilisation Operation, Applications, Fueling and Refueling the blower, Oxygenated Fuels