ASSEMBLY
grounding instructions
See Figure 4.
After installing the vacuum handle, connect the grounding wire as shown. This will help prevent static shock when using the vacuum in low humidity conditions.
Fig. 4
Installing the vacuum bag
See Figures 5 - 6.
Remove the nozzle and upper blower tube from the blower.
Unzip the vacuum bag and place the adaptor inside as shown.
Align the raised slots on the bag adaptor with the raised locking tabs on the blower housing outlet; push the bag adaptor onto the housing. Twist to lock into place.
Rotate the vacuum bag until the shoulder strap is up- right.
Make sure the vacuum bag is zipped and closed before starting the unit.
adaptor
vacuum bag 
Fig. 5
adaptor installed
in vacuum bag
raised
slot raised locking tab
Fig. 6
10
