| FEATURES |
|
|
PRODUCT SPECIFICATIONS |
|
String Cutting Width | 17 in. |
String Diameter | .080 in. to .95 in. max. |
KNOW YOUR STRING trimmer
ATTACHMENT
See Figure 1.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all op- erating features and safety rules.
Curved shaft GRASS DEFLECTOR
The trimmer includes a grass deflector that helps protect you from flying debris.
The
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the items from the box. Make sure that all items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
nInspect the product carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.
nIf any parts are damaged or missing, please call
PACKING LIST
Ryobi®
Curved Shaft Grass Deflector
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.
ATTACHing THE GRASS DEFLECTOR
See Figure 2.
NOTE: Install the grass deflector before the attachment is connected to the power head.
Remove bolt, washer, and wing nut from grass deflector.
Press the grass deflector onto the bottom of the curved shaft as shown.
Insert the bolt through the grass deflector and the bracket on the curved shaft.
Place the washer on the bolt.
Place the wing nut on the bolt and tighten securely.
JOINING THE POW ER HEAD TO THE Curved Shaft TRIMMER ATTACHMENT
See Figure 3.
WARNING:
Never attach or adjust any attachment while power head is running. Failure to stop the engine may cause serious personal injury.
5 — English
