ASSEMBLY

ATTACHING THE “J” HANDLE

See Figure 3.

The “J” handle must be used to ensure the best control and maximize operator safety when using the brushcutter.

Hold the top and bottom clamp snugly in position on the shaft housing so that handle will be located to the opera- tor’s left.

Insert the end of the handle between the clamps.

Align the bolt holes and push the long bolt (1/4-20 x 1-1/2 in.) through the handle side. Place short bolt (1/4-20 x 1 in.) through opposite side of clamp.

Install flat washers, lock washers, and hex nuts to hold the assembly in place.

After assembly is complete, adjust the position of the handle for best balance and comfort.

Tighten the long bolt, then the short bolt.

INSTALLING THE SHOULDER HARNESS AND STRAP HANGER

See Figure 4.

Pull apart the ends of the shoulder harness hanger to expand slightly.

Slide the hanger over the power head shaft immediately behind the “J” handle.

Squeeze hanger ends together to retighten.

Install the bolt, lock washer, and lock nut to secure.

Connect the latch on the shoulder harness to the ­strap hanger.

OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side shields when operating power tools. Failure to do so could result in objects being thrown into your eyes resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this product for the purpose listed below:

Cutting thicker weeds and pulpy stalks only

WARNING:

To avoid burns from hot surfaces, never operate unit with the bottom of the engine above waist level.

OPERATING THE BRUSHCUTTER

See Figures 5 - 6.

Hold the brushcutter with your right hand on the rear handle and your left hand on the “J” handle. Keep a firm grip with both hands while in operation. Brushcutter should be held at a comfortable position with the trigger handle about hip height. Maintain your grip and balance on both feet. Posi- tion yourself so that you will not be drawn off balance by the kickback reaction of the cutting blade.

Adjust the shoulder harness to position the brushcutter at a comfortable operating position and to ensure that the shoulder harness will reduce the risk of operator contact with the blade.

Ensure the blade has come to a complete stop before setting the brushcutter down.

BLADE THRUST

Exercise extreme caution when using the blade with this unit. Blade thrust is the reaction that may occur when the spinning blade contacts anything it cannot cut. This contact may cause the blade to stop for an instant and suddenly “thrust” the unit away from the object that was hit. This re- action can be violent enough to cause the operator to lose control of the unit. Blade thrust can occur without warning if the blade snags, stalls, or binds. This is more likely to oc- cur in areas where it is difficult to see the material being cut. For cutting ease and safety, approach the weeds being cut with the brushcutter from the right to the left. In the event an unexpected object or woody stock is encountered, this practice could minimize the blade thrust reaction.

7 — English

Page 6 Page 8
Page 7
Image 7
Ryobi RY15702 manuel dutilisation Operation
Page 6 Page 8

RY15702 specifications

The Ryobi RY15702 is a powerful and versatile string trimmer designed for homeowners and landscaping professionals alike. Renowned for its efficiency and ease of use, this trimmer integrates advanced technologies and user-friendly features that make yard maintenance simpler and more effective.

One of the most notable aspects of the Ryobi RY15702 is its robust 2-cycle engine. This engine delivers an impressive performance, allowing users to tackle tough weeds and overgrown grass with ease. It has a lightweight design, making it easy to maneuver around the yard, and its compact form factor ensures that storage is not an issue.

The RY15702 features a 17-inch cutting width, providing ample coverage for medium to large yards. This wide swath allows for quicker trimming and less time spent on maintenance tasks. The trimmer is equipped with a bump feed line system, ensuring that the cutting line is automatically and easily advanced with a simple tap on the ground, thus minimizing interruptions during use.

This model comes with an adjustable handle, allowing users to customize the height and angle according to their comfort. The rubber overmold grip provides added comfort and control, reducing fatigue during extended use. Additionally, Ryobi has integrated an anti-vibration technology into the design of the RY15702, which lessens the impact of vibrations, enhancing user experience and comfort.

The RY15702 is also designed with durability in mind. Its heavy-duty construction can withstand the rigors of regular use, and the fuel tank is designed for easy refueling, ensuring that operators spend less time on maintenance and more time getting the job done.

Safety features are also a priority in the RY15702’s design. It includes a protective shield that covers the cutting area, preventing debris from being thrown during operation and ensuring a safer trimming experience for the user.

In summary, the Ryobi RY15702 is a well-rounded string trimmer that combines power, comfort, and safety. Its efficient 2-cycle engine, 17-inch cutting width, and user-friendly features make it a standout choice for anyone looking to maintain their yard effectively. Whether you are a seasoned landscaper or a weekend warrior, the RY15702 can meet the demands of your trimming tasks with ease and precision.
Top Page Image Contents