| FEATURES |
|
|
PRODUCT SPECIFICATIONS |
|
Weight - (without fuel) | 8.7 lbs. |
Engine displacement | 26cc |
KNOW YOUR PRODUCT
See Figure 1.
The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all oper- ating features and safety rules, in both this manual and the operator’s manuals for all attachments that your are using with this power head.
ERGONOMIC DESIGN
The design of the product provides for easy handling. It is designed for comfort and ease of grasp when operating in different positions and at different angles.
TOP-MOUNTED ENGINE
The top mounted engine improves balance and is located away from the dust and debris of the cutting area.
ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included.
WARNING:
Do not use this product if any parts on the packing list are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.
WARNING:
Do not attempt to modify this product or create acces- sories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.
nInspect the product carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the product.
nIf any parts are damaged or missing, please call
PACKING LIST
Power head
Front Handle
Bottle of
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this product until the parts are replaced. Operation of this product with damaged or missing parts or without an attachment could result in serious personal injury.
INSTALLING AN ATTACHMENT TO THE POWER HEAD
See Figure 2.
WARNING:
Never install, remove, or adjust any attachment while power head is running. Failure to stop the engine can cause serious personal injury. Never operate power head without an attachment.
The attachment connects to the power head by means of a coupler device.
Loosen the knob on the coupler of the power head shaft and remove the hanger cap from the attachment.
Push in the button located on the attachment shaft. Align the button with the guide recess on the power head coupler and slide the two shafts together. Rotate the attachment shaft until the button locks into the positioning hole.
NOTE: If the button does not release completely in the positioning hole, the shafts are not locked into place. Slightly rotate from side to side until the button is locked into place.
6 — English
