OPERATION
POSITION FOR STARTING
See Figure 9.
Lay the pruner on the ground and ensure that no objects or obstructions are in the immediate vicinity. Make sure nothing can come in contact with the bar and chain.
Fig. 9
STARTER
GRIP
ENGINE
SWITCH
PRIMER BULB
STARTING AND STOPPING
See Figures 10 - 12.
TO START A COLD ENGINE:
DO NOT squeeze the throttle trigger until the engine starts and runs.
�n Lay the trimmer on a flat, bare surface. �n PRIME - Press the primer bulb 7 times. �n SET the start lever to the START position.
TRIGGER
LOCK
THROTTLE TRIGGER
START LEVER
Fig. 11
�n PULL the rope until the engine starts. �n Allow the engine to run for 15 seconds. �n Squeeze trigger lock and throttle trigger.
NOTE: Squeezing the throttle trigger releases the start lever to the RUN position.
TO START A WARM ENGINE:
PULL the rope until the engine starts.
TO STOP THE ENGINE:
Press and hold the switch in the stop “ 
” position until the engine stops.
ENGINE
SWITCH
TRIGGER
LOCK
THROTTLE |
|
TRIGGER | Fig. 10 |
|
START
POSITION
START LEVER
RUN POSITION
Fig. 12
12
