SPECIFIC SAFETY RULES
Kickback is a dangerous reaction that can lead to serious injury. Kickback may occur when the moving chain con- tacts an object at the upper portion of the tip of the guide bar or when the wood closes in and pinches the chain in the cut. Contact at the upper portion of the tip of the guide bar can cause the chain to dig into the object and stop the chain for an instant. The result is a
With a basic understanding of kickback, you can reduce or eliminate the element of surprise. Sudden surprise contributes to accidents.
Make sure that the area in which you are cutting is free from obstructions. Do not let the nose of the guide bar contact a log, branch, fence, or any other obstruction while you are operating the unit.
Cut only when visibility and light are adequate for you to see clearly.
Do not use on a ladder or unstable support. Always cut with both feet on solid ground to prevent being pulled off balance.
To protect yourself from electrocution, do not operate within 50 feet of overhead electrical lines.
Before starting the engine, make sure the chain is not contacting any object.
Always cut with the engine running at full speed. Fully squeeze the throttle trigger and maintain a steady cutting speed.
Do not force tool. Use the correct tool for your applica- tion. The correct tool will do the job better and safer at the rate for which it is designed.
To protect yourself from falling branches, do not stand di- rectly under the branch or limb being cut. This unit should not be held at an angle over 60° from ground level.
Keep the handles dry, clean, and free of oil or fuel mix- ture.
Shut off the engine and make sure the cutting attachment has stopped before setting the unit down.
To prevent electrical shock or serious personal injury, do not use this product with any AC power head.
Follow the sharpening and maintenance instructions for the saw chain.
Use only the replacement guide bars and low kickback chains specified for the unit.
REFUELING
FUEL IS HIGHLY FLAMMABLE. Take precautions when using to reduce the chance of serious personal injury.
Store fuel in a cool,
Store fuel in containers specifically designed for this purpose.
Only refuel outdoors and do not smoke while refueling.
Add fuel before starting the engine. Never remove the cap of the fuel tank or add fuel while the engine is running or when the engine is hot.
If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until fuel vapors have dissipated.
Replace all fuel tank and container caps securely.
If the fuel tank has to be drained, do this outdoors.
4
