![POSITION FOR STARTING](/images/new-backgrounds/93906/9390623x1.webp)
OPERATION
POSITION FOR STARTING
See Figure 9.
Lay the pruner on the ground and ensure that no objects or obstructions are in the immediate vicinity. Make sure nothing can come in contact with the bar and chain.
Fig. 9
STARTING AND STOPPING
See Figures 10 - 12.
TO START A COLD ENGINE:
DO NOT squeeze the throttle trigger until the engine starts and runs.
� Lay the trimmer on a flat, bare surface. � PRIME - Press the primer bulb 7 times. � SET the start lever to the START position. � PULL the rope until the engine starts.
� Allow the engine to run for
NOTE: Squeezing the throttle trigger releases the start lever to the RUN position.
TO START A WARM ENGINE:
PULL the rope until the engine starts.
TO STOP THE ENGINE:
Press and hold the switch in the stop “ ” position until the engine stops.
ENGINE
SWITCH
TRIGGER
LOCK
PRIMER BULB
STARTER GRIP
ENGINE SWITCH
STARTING
INSTRUCTION LABEL
THROTTLE
TRIGGER
Fig. 11
RUN
START
Fig. 12
THROTTLE |
|
TRIGGER | Fig. 10 |
|
12