ASSEMBLY

UNPACKING

This product requires assembly.

nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.

nInspect the tool carefully to make sure no breakage or damage occurred during shipping.

nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.

nIf any parts are damaged or missing, please call 1-800-860-4050 for assistance.

PACKING LIST

Power Head Assembly Pruner Attachment Extension Shaft Scabbard

Combination Wrench (5/8 in. x 3/4 in.)

8 oz. Bar and Chain Lubricant Bottle of 2-cycle Lubricant

Shoulder Strap Hanger (with mounting hardware) Shoulder Strap

“J” Handle Assembly:

   “J” Handle

   Top and Bottom Clamp

   Short Bolt

   Long Bolt

   Flat Washers (2)

   Lock Washers (2)

   Nuts (2)

Hanger Cap

Operator’s Manual

WARNING:

If any parts are damaged or missing do not operate this tool until the parts are replaced. Failure to heed this warn- ing could result in serious personal injury.

WARNING:

Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING:

To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts.

attaching the “j” handle

See Figure 2.

nHold the top and bottom clamp snugly in position on the shaft housing so that the handle will be located to the operator’s left.

nInsert the end of the handle between the clamps.

nAlign the bolt holes and push the long bolt (1/4-20 x 1-1/2 in.) through the handle side.

nPlace short bolt (1/4-20 x 1 in.) through opposite side of the clamp. Install the flat washer, lock washers, and hex nuts to hold the assembly in place.

nAfter assembly is complete, adjust the position of the handle for best balance and comfort.

nTighten the long bolt first and then the short bolt.

short

boltlong bolt

CLAMP “j”

HANDLE

CLAMP

FLAT WASHER

HEX NUT

LOCK

 

 

WASHER

Fig. 2

installing the shoulder strap and hanger

See Figure 3.

When operating this unit, you must wear a shoulder strap to support the unit.

To install the shoulder strap hanger:

nRemove the hex nut, lock washer, and bolt from the shoulder strap hanger.

nPull apart the ends of the hanger to expand slightly.

nSlide the hanger over the power head shaft immediately behind the “J” handle.

nSqueeze hanger ends together to retighten.

Page 7 Page 9
Page 8
Image 8
Ryobi RY52504, RY52905 Assembly, Unpacking, Packing List, Attaching the j handle, Installing the shoulder strap and hanger
Page 7 Page 9

RY52504, RY52905 specifications

The Ryobi RY52905 and RY52504 are two powerful electric pressure washers designed to meet the demands of various cleaning tasks around the home, yard, and driveway. These models are engineered for maximum efficiency and effectiveness, making them ideal for homeowners seeking reliable and user-friendly cleaning solutions.

The Ryobi RY52905 boasts a robust 2300 PSI (pounds per square inch) and 1.2 GPM (gallons per minute) water flow rate, ensuring it can tackle tougher stains and grime with ease. This model is equipped with a high-performance brushless motor that not only delivers superior power but also enhances durability and longevity. One of the standout features of the RY52905 is its adjustable pressure settings, allowing users to customize the pressure output based on the surface being cleaned. This versatility makes it suitable for everything from delicate surfaces like cars and bikes to tougher surfaces like patios and driveways.

The RY52504, while slightly less powerful with a rating of 2000 PSI and 1.2 GPM, still offers exceptional cleaning capabilities suitable for everyday tasks. Its compact design makes it easy to maneuver, and it comes with a 25-foot high-pressure hose, providing ample reach for most cleaning projects. The RY52504 features a series of quick-connect nozzle tips, enabling users to switch between different spray patterns for more effective cleaning tailored to specific needs.

Both pressure washers benefit from Ryobi’s innovative design elements, including a built-in detergent tank that allows for easy application of soap during cleaning. This feature enhances cleaning efficiency, especially when tackling tough stains like oil or grease. Additionally, the lightweight and portable design of both models makes them easy to transport and store when not in use.

Safety is a priority with these models, which come equipped with thermal relief valves to prevent overheating and integrated GFCI for electrical safety. They also feature non-marking wheels for easy movement and prevent damage to surfaces while working.

In summary, the Ryobi RY52905 and RY52504 electric pressure washers are excellent choices for homeowners looking for powerful, versatile, and safe cleaning solutions. With thoughtful features, advanced technologies, and varying power levels, these machines can address a wide range of cleaning tasks around the home, providing effective results with ease and convenience.
Top Page Image Contents