7
FEATURES
Fig. 1

PRODUCT SPECIFICATIONS

Engine Displacement.......................................................................................................................................................30cc
Bar length .......................................................................................................................................................................10 in.
Weight ..........................................................................................................................................................................16 lbs.

KNOW YOUR PRUNER

See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.

ENgINE SWITCH

The engine switch controls the ignition system. The switch
must be in the ON (I) position for the engine to start and
run.

“J” HANDLE

Using the “J” handle allows better control of the pruner to
maximize operator safety.

PRIMER BULB

The priming bulb pumps fuel from the fuel tank to the car-
buretor. This is necessary only when starting a cold engine
or after refueling an engine that has run out of fuel.

SHOULDER STRAP

The shoulder strap helps support the weight of the pruner
during use.

START LEVER

The start lever opens and closes the choke valve in the
carburetor.

STARTER gRIP

The starter grip is used for starting the engine.

THROTTLE TRIggER

The throttle trigger is used for starting the pruner, and also
for controlling blade rotation.
STARTER GRIP
BAR
PRIMER BULB
CHAIN OILER
TANK CAP
THROTTLE
TRIGGER
CHAIN
ENGINE
SwITCH
PRUNER
ATTACHMENT
SHOULDER
STRAP
“j”
HANDLE
COUPLER
KNOB
SCABBARD
EXTENSION
SHAfT
COMBINATION
wRENCH
TRIGGER
LOCK