Loose Parts, Tools Needed, Blade, Plastic Tubing

LOOSE PARTS

Check all loose parts from the box with the list below. Assemble according to the instructions on the following pages.

•3 mm T-Handle Hex Key

•4 mm Hex Key

•Blade(s)

•Plastic Tubing

4 mm HEX KEY

3 mm T-HANDLE HEX KEY

Fig. 2

The following tools (not included) are needed for adjustments and alignment:

• Combination Square

• Phillips Screwdriver

• Slotted Screwdriver

Fig. 3

Page 8

Image 8

Contents

Save this Manual for Future Reference Thank YOU for Buying a Ryobi Scroll SAW Introduction Table of ContentsProduct Specifications Blade Coasts After Turn OFF Rules for Safe OperationRead ALL Instructions Before Making a CUT, be Sure ALL ADJUST- Ments are Secure Do not Remove Jammed Cutoff Pieces until blade has stopped Safety and International Symbols Meaning Electrical Extension CordsElectrical Connection Grounding Instructions SPM Glossary of Terms for WoodworkingUnpacking Loose Parts Tools NeededBlade Plastic Tubing Features Know Your Scroll SAW Assembly Mounting Scroll SAW to WorkbenchClamping Scroll SAW to Workbench Clamp SAW Base Mounting Board Workbench Adjustments Drop FootSawdust Blower Squaring the SAW Table to the Blade Adjusting Drop Foot Indicator Table Lock KnobBevel Scale Screw Blade Tension Knob Installing Blades Drop Foot Lock Knob Blade Clamp Screw SAW Blade Throat Plate Operation Blade Information Using Variable SpeedChoice of Blade and Speed Scroll Cutting Interior Scroll CuttingStack Cutting Drill Hole Interior CUT Workpiece Maintenance General MaintenanceARM Bearings Motor Brushes Troubleshooting Problem Cause SolutionPage Mm Variable Speed Scroll Saw Model SC164VS Ryobi TECHNOLOGIES, INC