Ryobi SSP0501 manuel dutilisation Specific Safety Rules

SPECIFIC SAFETY RULES

Keep guards in place and in working order. Never oper- ate the tool with any guard or cover removed. Make sure all guards are operating properly before each use.

To reduce the risk of injury, keep children and visitors away. All visitors should wear safety glasses and be kept a safe distance from work area.

Keep the area of operation clear of all persons, particularly small children, and pets.

Use right tool. Don’t force tool or attachment to do a job it was not designed for. Don’t use it for a purpose not intended.

Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear that will protect your feet and improve your footing on slippery surfaces.

Exercise caution to avoid slipping or falling.

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Following this rule will reduce the risk of serious personal injury.

Use only recommended accessories. The use of im- proper accessories may cause risk of injury.

Follow the maintenance instructions specified in this manual.

Check damaged parts. Before further use of the tool, a guard or other part that is damaged should be care- fully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its operation. A guard or other part that is damaged must be properly repaired or replaced by an authorized service center to avoid risk of personal injury.

Never leave tool running unattended. Turn power off. Don’t leave tool until it comes to a complete stop.

Be thoroughly familiar with controls. Know how to stop the product quickly.

Keep tool dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any solvents to clean tool.

Do not use tool if switch does not turn it off. Have de- fective switches replaced by an authorized service center.

Before cleaning, repairing, or inspecting, shut off the motor and make certain all moving parts have stopped.

Avoid dangerous environment. Don’t use in damp or wet locations or expose to rain. Keep work area well lit.

Never direct a paint stream toward people or pets, or any electrical device.

Never start the machine if ice has formed in any part of the equipment.

WARNING: High pressure spray can be dangerous if subject to misuse. The spray must not be directed at persons, animals, electrical devices, or the machine itself.

Keep away from hot parts.

Check bolts and nuts for looseness before each use. A loose bolt or nut may cause serious motor problems.

Before storing, allow the product to cool.

Store in a cool, well-ventilated area, safely away from spark and/or flame-producing equipment.

When servicing use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

Never use the sprayer without a spray tip installed.

An injection injury can lead to possible amputation. See a physician immediately.

Never put your hand in front of the spray tip when in use. Gloves will not always provide protection against an injection injury.

Wear clothing to keep paint off skin and hair, along with a mask or respirator during use. Paints, solvents, and other materials can be harmful if inhaled or if they come into contact with the body.

Always unplug the sprayer and shut the unit off before servicing, cleaning the tip or guard, changing the tip, or leaving unattended.

Plastic can cause sparks. Never hang plastic to enclose a spray area. Do not use plastic drop cloths when spraying flammable materials.

Do not spray outdoors on windy days.

Do not attempt to clean or unclog the spray tip with your finger.

Save these instructions. Refer to them frequently and use them to instruct other users. If you loan someone this tool, loan them these instructions also.

4 — English