OPERATION

WARNING:

Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury.

WARNING:

To reduce the risk of injection, do not point sprayer at any part of the body or person. In case of skin injection, seek medical attention immediately. Do not use without spray tip in place.

WARNING:

Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury.

WARNING:

Do not use any attachments or accessories not recom- mended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

APPLICATIONS

You may use this product for the purpose listed below:

Interior and exterior painting and staining of decks, outdoor furniture, fences, and walls

WARNING:

Risk of fire or explosion. Spray area must be well-venti- lated and away from sparks or flames.

FILLING SPRAYER WITH PAINT/STAIN

See Figures 3 - 4, page 12.

Remove and discard any skin that has formed on top of the paint or stain, then thoroughly mix the material in its original container before beginning.

NOTE: Older containers of stain and paint may need to be strained before use.

Unplug the sprayer.

Remove the quick-lock container by twisting counter- clockwise so that the arrow on the container lines up with the “unlock” symbol on the lid.

Fill the container with paint or stain as desired. Do not fill above the max fill mark on the container.

Reinstall the container on the sprayer and twist clockwise so that the arrow on the container lines up with the “lock” symbol on the lid.

OPERATING THE SPRAYER

See Figures 5 - 7, page 13.

Ensure surface to be painted is free of dust, dirt, and grease.

Mask or cover any areas not intended to be painted or stained. Be aware of wind that may cause your paint or stain to spray into areas not desired. Always use drop cloths or other cover to protect areas that are not intended to be painted or stained.

Place a line of lubricant on the piston. To gain access to the piston, follow the instructions in Cleaning the Sprayer for Storage in the Maintenance section of this manual.

Re-assemble the spray tip assembly.

The tip guard may be set to spray paint in either a horizontal or vertical pattern.

To change direction of the spray, slightly loosen the wide fan tip by rotating counter-clockwise 1/4 turn. Rotate the adjusting arm 1/4 turn in the direction needed to switch the direction of the tip spray. While holding the adjusting arm in position, rotate the wide fan tip clockwise until securely tightened.

Fill the quick-lock paint container with no more than 1.0 quart of desired paint or stain.

Plug in the sprayer.

Pull the switch trigger to spray paint. Release the switch trigger to stop paint spray.

Practice spraying on a piece of scrap material to test your spray pattern and to prime the pump before beginning. If you cannot get a good spray pattern with an even amount of paint or stain throughout, refer to the Troubleshooting section later in this manual.

NOTE: The pump must be primed after every paint change and at first use after storing. Spray paint at a scrap surface for at least 20 seconds to prime.

8 — English

Page 7 Page 9
Page 8
Image 8
Ryobi SSP0501 manuel dutilisation Operation, Applications, Filling Sprayer with PAINT/STAIN, Operating the Sprayer
Page 7 Page 9

SSP0501 specifications

The Ryobi SSP0501 is a powerful and versatile multi-tool that caters to both DIY enthusiasts and professional tradespeople. This innovative tool excels in a variety of applications, making it a must-have in any workshop or home garage.

One of the standout features of the Ryobi SSP0501 is its robust motor, which delivers consistent power for efficient performance. The tool's design emphasizes ease of use, with ergonomic handles that offer a comfortable grip, reducing user fatigue during extended projects. The lightweight design further enhances maneuverability, allowing users to tackle intricate tasks without straining.

The SSP0501 is equipped with a range of attachments that enable it to function as a sander, grinder, and cutter. This versatility makes it suitable for a broad spectrum of materials including wood, metal, and plastics. The quick-release attachment system simplifies the process of switching between tools, ensuring that users can seamlessly adapt to various tasks without wasting valuable time.

Additionally, the Ryobi SSP0501 incorporates advanced technology to enhance its performance. The variable speed control allows users to adjust the tool's speed according to the specific requirements of the job at hand. This feature not only improves precision but also extends the lifespan of the attachments by minimizing wear and tear.

Safety is a paramount concern in all Ryobi products, and the SSP0501 is no exception. It includes built-in safety features such as an adjustable guard to shield users from debris and a lock-on switch for continuous operation, reducing the risk of accidental activation.

Battery performance is another crucial aspect of the SSP0501. It boasts a long-lasting battery life, and when paired with Ryobi's One+ system, users can interchange batteries across multiple tools, maximizing efficiency and convenience. The LED work light enhances visibility in dimly lit areas, providing added functionality during use.

In summary, the Ryobi SSP0501 stands out due to its durable construction, powerful motor, and a plethora of attachments that make it an exceptional choice for various projects. Its user-friendly design, adjustable speed control, and safety features further elevate its usability. Whether for household repairs or professional tasks, the SSP0501 is a formidable tool that combines power and versatility, ensuring it meets the demands of any user. This multi-tool is a valuable investment for those seeking practicality and efficiency in their work.
Top Page Image Contents