Page 12
ACCESSORIESStandard accessories included with your laminate trimmer
are two wrenches and a 1/2 in. (13 mm) diameter flush trim
bit.
The following is a list of optional accessories available for
your TR30 Laminate Trimmer:
Part No. Description
6072373 Trimmer Guide
4675208 Straight Trim Bit
6072063 Straight Guide
HELPFUL HINTS
✓Always clamp workpiece securely before trimming.
✓A safe operator is one who thinks ahead.
✓Always wear eye protection when trimming.
✓Make setup adjustments carefully. Then double check.
Measure twice and cut once.
✓Keep cutters clean and properly sharpened.
✓Don’t let familiarity make you careless.
✓Study all safety rules and do the job safely.
✓NEVER place your hands in jeopardy.
✓ Make certain clamps can’t loosen while in use.
✓Test difficult setups on scrap — Don’t waste lumber.
✓Plan each operation before you begin.
✓Provide for smoother operation by cleaning your
trimmer frequently. Shake trimmer or blow with an air
jet to remove sawdust buildup.
✓THINK SAFETY BY THINKING AHEAD.
Fig. 10
WARNING:
Avoid hand positions that may expose fingers to cutter
through open areas of trimmer base.
See Figure 11.
Fig. 11
EDGE SHAPING WITH OPTIONAL TRIMMER GUIDE