ACCESSORIES
HELPFUL HINTS
EDGE SHAPING WITH OPTIONAL TRIMMER GUIDE
✓ Always clamp workpiece securely before trimming. ✓ A safe operator is one who thinks ahead.
✓ Always wear eye protection when trimming.
✓ Make setup adjustments carefully. Then double check. Measure twice and cut once.
✓ Keep cutters clean and properly sharpened. ✓ Don’t let familiarity make you careless.
✓ Study all safety rules and do the job safely. ✓ NEVER place your hands in jeopardy.
✓ Make certain clamps can’t loosen while in use.
✓ Test difficult setups on scrap — Don’t waste lumber. ✓ Plan each operation before you begin.
✓ | Provide for smoother operation by cleaning your |
|
| trimmer frequently. Shake trimmer or blow with an air |
|
| jet to remove sawdust buildup. |
|
✓ | THINK SAFETY BY THINKING AHEAD. | Fig. 11 |
Standard accessories included with your laminate trimmer are two wrenches. A subbase accessory with two handles is also included.
The following is a list of optional accessories available for your Laminate Trimmer:
Part No. | Description |
6072373 | Trimmer Guide |
4675208 | Straight Trim Bit |
6072063 | Straight Guide |
Fig. 12
WARNING:
Avoid hand positions that may expose fingers to cutter through open areas of trimmer base. See Figure 12.
Page 13
