GENERAL SAFETY RULES

DANGER:

READ AND UNDERSTAND TOOL LABELS AND MANUAL. Failure to follow warnings could result in DEATH or SERIOUS INJURY.

SAVE THESE INSTRUCTIONS

WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Floor must not be slippery from wax or dust.

Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while op- erating tools. Distractions can cause you to lose control.

Operate air compressor in an open area at least 18 in. away from any wall or object that could restrict the flow of fresh air to ventilation openings.

ELECTRICAL SAFETY

Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded.

Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of elec- tric shock.

Do not abuse the cord. Never use the cord to carry the tool or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock.

When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These cords are rated for outdoor use and reduce the risk of electric shock.

personal safety

Use safety equipment. Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.

Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protec- tion. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries.

The employer and/or user must ensure that proper eye protection is worn. We recommend a Wide Vision Safety Mask for use over eyeglasses or standard safety glasses that provide protection against flying particles both from the front and side. Always use eye protection which is marked to comply with ANSI Z87.1.

Ensure compatibility of accessories before using.

Read and understand the operator’s manual for any accessories or air tools before using.

Additional safety protection will be required in some environments. For example, the working area may in- clude exposure to a noise level which can lead to hearing damage. The employer and user must ensure that any necessary hearing protection is provided and used by the operator and others in the work area. Some environments will require the use of head protection equipment. When required, the employer and user must ensure that head protection marked to comply with ANSI Z89.1 is used.

Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.

Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations.

Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the tool in unexpected situations.

TOOL USE AND CARE

Do not exceed the pressure rating of any component in the system.

Protect material lines and air lines from damage or puncture. Keep hose and power cord away from sharp objects, chemical spills, oil, solvents, and wet floors.

Check hoses for weak or worn condition before each use, making certain all connections are secure. Do not use if defect is found. Purchase a new hose or notify an authorized service center for examination or repair.

Release all pressures within the system slowly. Dust and debris may be harmful.

Store idle tools out of the reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

Maintain tools with care. Follow maintenance instruc- tions. Properly maintained tools are easier to control.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.

Never point any tool toward yourself or others.

3 - English

Page 2 Page 4
Page 3
Image 3
Ryobi YN301PL1 manuel dutilisation General Safety Rules, Work Area, Electrical Safety, Personal safety, Tool USE and Care
Page 2 Page 4

YN301PL1, YN301PL specifications

The Ryobi YN301PL and YN301PL1 represent a significant innovation in the field of power tools, specifically aiming to enhance the user's experience with efficient and effective performance. These models are designed with a user-friendly approach, catering to DIY enthusiasts and professionals alike.

One of the prominent features of the Ryobi YN301PL and YN301PL1 is their powerful motor, which delivers robust performance for various applications. The efficient motor significantly reduces vibration, enabling smoother and more precise control during operation. This feature is particularly advantageous for tasks requiring extended use, minimizing user fatigue.

Both models boast a lightweight and ergonomic design, making them easy to handle and maneuver. The balanced weight distribution ensures that users can work for longer periods without straining their wrists or arms. This thoughtful design is complemented by a comfortable grip, which enhances user control and stability.

In terms of versatility, the Ryobi YN301PL and YN301PL1 support multiple attachments and accessories, allowing users to tackle a range of projects, from sanding and polishing to drilling and cutting. This adaptability makes them suitable for various materials, including wood, metal, and plastic, ensuring that users can seamlessly switch between tasks without needing multiple tools.

The inclusion of advanced technology further enhances the performance of both models. The integrated speed control feature allows users to adjust the operational speed for different tasks, providing greater precision and versatility. This is particularly useful in delicate applications where a gentle touch is required.

Durability is another hallmark of the Ryobi YN301PL and YN301PL1. Constructed with high-quality materials, these tools are built to withstand rigorous use. The robust design not only enhances longevity but also ensures reliability even under demanding conditions.

Lastly, both models prioritize safety, incorporating protective features that safeguard users during operation. These measures not only enhance the overall user experience but also instill confidence in those using the tools for both light and heavy-duty tasks.

In conclusion, the Ryobi YN301PL and YN301PL1 stand out due to their powerful performance, ergonomic design, versatility, advanced technology, and safety features. They are ideal tools for anyone looking to elevate their DIY projects or professional jobs, ensuring that quality and efficiency are always within reach.
Top Page Image Contents