GENERAL SAFETY RULES

Keep the exterior of the air compressor dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum- based products, or any strong solvents to clean the unit. Following this rule will reduce the risk of deterioration of the enclosure plastic.

SERVICE

Tool service must be performed only by qualified re- pair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury.

Disconnect power supply, open drain valve to de- compress tank and allow water to drain, and allow air compressor to become cool to the touch before servicing. Turn pressure regulator knob fully counter- clockwise after shutting off compressor.

When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of injury.

SPECIFIC SAFETY RULES

Know your air compressor. Read operator’s manual carefully. Learn its applications and limitations, as well as the specific potential hazards related to this tool. Following this rule will reduce the risk of electric shock, fire, or serious injury.

Drain tank of moisture after each day’s use. If unit will not be used for a while, it is best to leave drain valve open until such time as it is to be used. This will allow moisture to completely drain out and help prevent corrosion on the inside of tank.

Risk of Fire or Explosion. Do not spray flammable liquid in a confined area. Spray area must be well ventilated. Do not smoke while spraying or spray where spark or flame is present. Keep compressors as far from the spraying area as possible, at least 15 feet from the spraying area and all explosive vapors.

Risk of Bursting. Do not adjust regulator to result in output pressure greater than marked maximum pressure of attachment and/or the item being inflated. Never use at pressure greater than 135 psi.

Use an air pressure gauge periodically while inflating an item to check the air pressure.

If connected to a circuit protected by fuses, use time- delay fuses with this product.

To reduce the risk of electric shock, do not expose to rain. Store indoors.

Inspect tank yearly for rust, pin holes, or other imperfections that could cause it to become unsafe. Never weld or drill holes in the air tank.

Make sure the hose is free of obstructions or snags. Entangled or snarled hoses can cause loss of balance or footing and may become damaged.

Use the air compressor only for its intended use. Do not alter or modify the unit from the original design or function.

Always be aware that misuse and improper handling of this tool can cause injury to yourself and others.

Do not place over 250 lbs on the work seatDoing. so could result in damage to the product.

Never step or stand on the work seat. Following this rule will reduce the risk of serious personal injury.

To reduce the risk of personal injury, do not use work seat as a step or platform.

Never leave a tool unattended with the coil air hose attached.

Do not operate this tool if it does not contain a legible warning label.

Do not continue to use a tool or hose that leaks air or does not function properly.

Always disconnect the air supply and power supply before making adjustments, servicing a tool, or when a tool is not in use.

Do not attempt to pull or carry the air compressor by the hose.

Your tool may require more air consumption than this air compressor is capable of providing.

Always follow all safety rules recommended by the manufacturer of your air tool, in addition to all safety rules for the air compressor. Following this rule will reduce the risk of serious personal injury.

Never direct a jet of compressed air toward people or animals. Take care not to blow dust and dirt towards yourself or others. Following this rule will reduce the risk of serious injury.

4 - English

Page 3 Page 5
Page 4
Image 4
Ryobi YN301PL1 manuel dutilisation Specific Safety Rules, Service
Page 3 Page 5

YN301PL1, YN301PL specifications

The Ryobi YN301PL and YN301PL1 represent a significant innovation in the field of power tools, specifically aiming to enhance the user's experience with efficient and effective performance. These models are designed with a user-friendly approach, catering to DIY enthusiasts and professionals alike.

One of the prominent features of the Ryobi YN301PL and YN301PL1 is their powerful motor, which delivers robust performance for various applications. The efficient motor significantly reduces vibration, enabling smoother and more precise control during operation. This feature is particularly advantageous for tasks requiring extended use, minimizing user fatigue.

Both models boast a lightweight and ergonomic design, making them easy to handle and maneuver. The balanced weight distribution ensures that users can work for longer periods without straining their wrists or arms. This thoughtful design is complemented by a comfortable grip, which enhances user control and stability.

In terms of versatility, the Ryobi YN301PL and YN301PL1 support multiple attachments and accessories, allowing users to tackle a range of projects, from sanding and polishing to drilling and cutting. This adaptability makes them suitable for various materials, including wood, metal, and plastic, ensuring that users can seamlessly switch between tasks without needing multiple tools.

The inclusion of advanced technology further enhances the performance of both models. The integrated speed control feature allows users to adjust the operational speed for different tasks, providing greater precision and versatility. This is particularly useful in delicate applications where a gentle touch is required.

Durability is another hallmark of the Ryobi YN301PL and YN301PL1. Constructed with high-quality materials, these tools are built to withstand rigorous use. The robust design not only enhances longevity but also ensures reliability even under demanding conditions.

Lastly, both models prioritize safety, incorporating protective features that safeguard users during operation. These measures not only enhance the overall user experience but also instill confidence in those using the tools for both light and heavy-duty tasks.

In conclusion, the Ryobi YN301PL and YN301PL1 stand out due to their powerful performance, ergonomic design, versatility, advanced technology, and safety features. They are ideal tools for anyone looking to elevate their DIY projects or professional jobs, ensuring that quality and efficiency are always within reach.
Top Page Image Contents