ASSEMBLY
UNPACKING
This product requires assembly.
nCarefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
Pole Pruner
Blade
Blade Cover
Hex Key
Operator’s Manual
Warranty Registration Card
WARNING:
If any parts are damaged or missing do not operate this tool until the damaged or missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
WARNING:
Blades are sharp. When installing and removing the blade, wear
INSTALLING/REMOVING THE BLADE
See Figures 2 - 3.
INSTALLING THE BLADE:
nRemove the battery pack from the pole pruner.
nRemove the hex key from the storage area.
nPlace the hex key in the access hole and loosen the blade retaining screw.
nInstall the blade into the mounting clamp.
NOTE: Make sure the mounting clamp pin is positioned correctly in the positioning pin hole of the blade. If not positioned correctly the mounting clamp will not hold the blade securely.
nTighten the blade retaining screw securely with the hex key.
nReturn the hex key to the storage area.
nReinstall the battery pack in the tool.
REMOVING THE BLADE
nRemove the battery pack from the pole pruner.
nRemove the hex key from the storage area.
nPlace the hex key in access hole and remove the blade retaining screw.
nRemove the blade from the unit, making sure the blade clears the mounting clamp pin.
nReinstall the battery pack in the tool.
HEX KEY
HEX KEY
STORAGE
Fig. 2
MOUNTING
CLAMP PIN 
| MOUNTING |
POSITIONING | CLAMP |
| |
PIN HOLE | Fig. 3 |
9
