ASSEMBLY
ATTACHING THE SHOULDER STRAP
See Figure 5.
1.Connect the latch on the shoulder strap to the strap hanger.
2.Adjust the strap to a comfortable position.
NOTE: To quickly release the product from the shoulder strap, sharply pull the quick release tab
SHOULDER
REAR HOUSING
TORQUE
WRENCH
SCREWS
SILENCER
GUARD
QUICK
STRAP
RELEASE
TAB
LATCH
BENT END OF
SILENCER GUARD
OPENING IN REAR
HOUSING
Fig. 6
STRAP HANGER
Fig. 5
SILENCER GUARD
See Figure 6.
1.Remove silencer guard and two screws from the owner’s kit.
2.Attach the silencer guard to the rear housing.
NOTE: Make sure the bent end of the silencer guard fits securely into the opening of the rear housing.
3.Using the torque wrench supplied, install the two screws and tighten securely.
NOTE: When converting from brushcutter to trimmer, or trimmer to brushcutter, make sure the correct guard/ deflector is being used. See Figure 7.
GRASS DEFLECTOR FOR
TRIMMER USE
BLADE GUARD FOR
BRUSHCUTTER USE
Fig. 7
9
