ASSEMBLY
ADDING SAND
See Figure 6.
The cultivator is equipped with a Just Add Sand™ weight system, which improves the stability of the unit during op-
eration. The added weight of the sand also helps you work with less effort and vibration.
To add sand:
Lift the lid of the Just Add Sand™ tank and remove. JUST ADD SAND™ LID
Pour dry sand into the tank. The tank will hold approxi- mately 13 pounds of sand.
NOTE: Be careful not to pour sand into or onto the motor housing.
Replace Just Add Sand™ lid.
Fig. 6
OPERATION
WARNING:
Do not allow familiarity with tools to make you care- less. Remember that a careless fraction of a second is sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could re- sult in objects being thrown into your eyes, resulting in possible serious injury.
APPLICATIONS
Breaking up garden soil to prepare seed bed for planting
Shallow cultivating to remove weeds
STARTING/STOPPING THE
CULTIVATOR
See Figures 7 - 8.
Plug the cultivator into an approved outdoor extension cord.
Route the extension cord through the extension cord retainer rings.
WARNING:
Do not use any attachments or accessories not recom- mended by the manufacturer of this tool. The use of at- tachments or accessories not recommended can result in serious personal injury.
RETAINER
RINGS
WARNING:
EXTENSION
CORD
Do not allow hands, feet, or any other part of the body or clothing near the rotating tines or any other moving part. The tines begin to rotate forward once the switch trigger is depressed. The tines continue to rotate until the switch trigger is released. Failure to avoid contact could cause serious personal injury.
PLUG
CONNECTOR
Fig. 7
11
