TROUBLESHOOTING
PROBLEM | CAUSE | REMEDY |
Engine fails to start. | Engine switch is in the off position. | Move switch to start. |
| No fuel in tank. | Fill tank. |
| Spark plug shorted or fouled. | Replace spark plug. |
| Spark plug is broken (cracked | Replace spark plug. |
| porcelain or electrodes broken). |
|
| Ignition lead wire shorted, broken, or | Replace lead wire or attach to spark |
| disconnected from spark plug. | plug. |
| Ignition inoperative. | Contact authorized service center. |
|
|
|
Engine hard to start. | Water in gasoline or stale fuel mixture. | Drain entire system and refill with fresh |
|
| fuel. |
| Too much oil in fuel mixture. | Drain and refill with correct mixture. |
| Engine is under or over choked. | Adjust choke as necessary. |
| Weak spark at spark plug. | Contact authorized service center. |
|
|
|
Engine lacks power. | Air filter clogged. | Clean or replace air filter. |
|
|
|
Engine overheats. | Insufficient oil in fuel mixture. | Mix fuel as described in starting |
|
| instructions. |
|
|
|
| L |
|
| CAL | |
|
| |
| ||
800 |
| |
1- |
|
|
CALL US FIRST
For any questions about operating or maintaining your product,
call the Ryobi® Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.
18
