MOTOR-MOWER CONTROLS
See fig. 3.
1.Clutch lever.
2.Engine stop lever.
OPERATING THE CONTROLS
Clutch lever
(See figure 4)
−Lever (1) pulled up: clutch disengaged.
−Lever (1) released: clutch engaged.
Engine stop lever
(See figure 4)
−Lever (2) pressed down: engine running.
−Lever (2) released: engine stopped.
Some gasoline motors can be stopped by means of a button (see the engine Operating and Maintenance manual); to stop the engine, for example with the lever of the motorstop locked in low position, press this button.
Gear lever
Use the gear lever as instructed below (see figure 5):
a.Turn the throttle control lever to idle position.
b.Pull up clutch lever.
c.Move the gear lever (1) to the required position (see the plate illustrated in detail A), and release it as soon as the gear is engaged.
8
3.Gear lever.
4.PTO control lever.
5.Throttle control lever.
6.PTO instant adaptor.
d.Gradually release the clutch lever while accelerat- ing the engine.
e.To disengage gear, pull up the clutch lever and move gear lever (1) to the neutral position.
